Riser

Inspired by the BMX bars of yesteryear - 6061 T6 aluminum - Shot peened and anodized black or silver - The 22mm OD crossbar is not there just for strength, but allows installing accessories

CrMo with internal taper for best strength-to-weight

CrMo with internal taper for best strength-to-weight

Made from heat-treated aluminum, tested to Motocross safety standards Marked for custom cut length

Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants. - 38MM RISE: Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher. - 50MM RISE: It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions. After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again. We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them. Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left. In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s. For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height. Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back". The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too. - Width: 800mm - Rise: 38mm, 50mm - Available in 35mm clamp only. - Backsweep: 9° - Upsweep: 5° - Weight: 38mm Rise = 346g, 50mm Rise = 391g

Rise and shred. A lightweight carbon MTB riser bar born to rip. Where it thrives: In competition, challenging trails What it's built for: Precision, control, durability Highlights: - Carbon fiber construction - Lightweight - 780mm wide, 9 deg backsweep, 4 deg upsweep, 31.8 diameter

Descend with confidence. 16% more compliant than our competitors, this enduro and gravity focused handlebar that doesn't forget about weight or compliance. Where it thrives: Challenging trails, down hills What it's built for: Stability, control, confidence Highlights: - Carbon fiber construction for compliance and weight savings - 800mm width, 35mm clamp size, 210g - 30mm rise, 8 degree backsweep, 5 degree upsweep

- Super wide 800mm Enduro/Freeride/Downhill riser bar - Custom drawn 7000 series alloy provides highest strength to weight of all Chromag bars

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.

- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum

- Narrow profile, fixie-riser bar with an oversized clamping area - 6061-T6 aluminum alloy construction - 53cm width with graduation marks to 38cm to ensure accurate cutting

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

Budget-friendly mountain bars with stylish flair. - Plain gauge, tapered and shot-peened AL6061/T6 - Shot-peened for surface hardness - 15mm rise - 9° backsweep, 4° upsweep - Bar Clamp Diameter: 31.8mm - Material: Alloy - Width: 740mm

Double butted, tapered, shot peened 6061 aluminum

FSA's SL-K handlebar is the ultimate mix of lightweight and strong, for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both carbon and aluminum construction. The carbon helps keep the vibration to a minimum, while the aluminum core maintains its strength. The SL-K handlebar maintains XC weight with Enduro strength. With both medium 18mm rise or flat options and a solid 740mm width, this bar will help with a perfect fit, great control, and utmost performance for even the most demanding rider in mind. - Weight: 235g - Width: 740mm - Material: Carbon - Upsweep: 4° - Backsweep: 9°

- Light enough for XC, but strong enough for Enduro and Trail - Carbon composite construction - Reinforced and textured clamping areas, with markers for accurate shortening - 5/8 degree with +10mm setback

- Swaged 6061 aluminum with unique bend: 15 degree forwards then 30 degree back

- Urban riser bar made from tough 6061 aluminum - Includes shims to fit 31.8mm stem clamp

- Ultra-versatile, multi-use 31.8mm bar can be used on a wide variety of builds- XC, Gravel and Urban bikes - Constructed from 6061 T6 spiral butted tubing making the Beard bar lighter yet not sacrificing any strength while staying comfortable - 750mm wide, 31.8mm clamp - 17mm rise, 40 degrees back sweep, 20-degree upsweep

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

- Aluminum cruiser bar offers an upright, comfortable riding position - Rigid aluminum construction, compatible with MTB-style levers/shifters

- Narrow aluminum riser bar for urban use (not recommended for freestyle)

Odyssey Shortcut BMX Handlebar - Butted 20mm crossbar - 1.8/1.3mm thick, multi-butted main tubing - Large radius bends for greater durability - Post-weld heat-treated for added strength

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

The BOSS bar is Aaron Ross’ signature bar that is multi-butted and 41-Thermal processed 4130 chromoly. - Aaron Ross signature - Proven 41-Thermal processed 4130 chromoly - Multi-Butted, traditional 7/8" crossbar for strength

The Super Highway bar is a mid-rise bar that comes with Odyssey's legendary 41-Thermal lifetime warranty. - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength

Broc Raifrod's new signature BROC bar is built around the popular Odyssey Lumberjack XXL bar shape but uses a more narrow "pre-cut" 29" width and slightly less backsweep at 10 degrees. - 41-Thermal Lifetime Warranty - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated

The award-winning vibration damping of One Up Components carbon handlebars now available in aluminum\n - Fine shot peened and anodized 7050-T76 aluminum alloy with glossy logos - Patented oval bar shape increases vertical compliance and combines the best characteristics of 31.8 & 35.0mm diameter handlebar standards - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

More compliance, more comfort and more World Cup proven performance. Our updated oval profile makes the V2 Bar more compliant than any other 35mm diameter handlebar and up to 33% more compliant than our renowned V1 Carbon Bar. The new dedicated 760mm bar is optimized for narrower widths and the introduction of a 50mm rise in the 800mm gives more riders, more options. With 5 different configurations of width and rise, there’s a bar to fit every rider’s needs, across all disciplines

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

- Constructed of 7050 aluminum and features built-in bar plugs for added safety. Bar diameter is 15.5mm, works with J-Unit grips only

Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.

These 42cm alloy riser handlebars are awesome. Designed by Pure Fix Cycles in California. - Perfect for fixies and urban warrior steeds - 16.5" Wide - 2.25" High - These bars have an ISO standard 25.4mm stem clamp diameter and 22.2mm brake clamp diameter

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°

Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- Butted alloy tube, cold-drawn and shot-peened to increase fatigue resistance - Intended use: XC, Trail and All Mountain - Bar Clamp Diameter: 31.8 mm - Bend: 9 deg - Weight: 290 g

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

XC riding is changing – Bikes, trails and riders are all progressing and pushing boundaries. Our new Next SL bar was designed to reduce rider fatigue without compromising handling. This bar allows good vertical flex for comfort, while also eliminating bad horizontal flex to improve steering precision.

Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- V2 is now 760mm in lenght with updated graphics - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption - Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness - UD carbon fiber layup is specific to each model and rise

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

An ideal handlebar for riding anything from all mountain to downhill, Renthal's FatBar Carbon handlebar combines a blend of strength, stiffness, shock absorption, and weight savings. - Uni-Directional carbon construction - Ride-tuned to provide an ideal combination of stiffness and shock absorption - Increased center section width for fine-tuned flex characteristics - Downhill and twin crown fork compatible - Permanent graphics, set-up grid and cut marks

- The Fatbar Lite Carbon 35 is the ultimate light-weight, trail-proof handlebar. - Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon 35 is the clear market leader in terms of weight, strength, stiffness and most importantly, ‘rid

Lightweight 6061 aluminum handlebar with extra backsweep makes it possible for kids to change position more quickly, to steer the bike more actively and to support the child in an ergonomic posture on the bike - Designed around smaller shoulder width and arm span of young riders

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

- Initially designed and built for trials, it soon became apparent this handlebar can serve as a high-rise bar for almost any discipline - Due to its 76mm rise and pleasing 9-degree backsweep, this handlebar affords an upright position that is comfortable enough for leisure and daily commuters - High rise 7050-T6 aluminum bar

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks