Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

absoluteBLACK GRAPHENwax Hot Melt Chain Wax Lubricant
$34.99
World's first pliable hot melt chain wax formula with Graphene for use in crockpots is here. GRAPHENwax—Super pliable, non-crumble, quiet, clean and extremely easy to break-in formula. It exhibits excellent dirt protecting capabilities and durability while maintaining impressively low friction for a prolonged period of time in dry and mixed conditions. It's the easiest wax to break-in after chain cools down—simply hold your chain in one hand and run it between two fingers of your free hand (as per our video) and job done—no more solid sticks or backpedaling issues. Our wax doesn't crumble, chip or leave any marks thanks to our proprietary formula. It's everything you wished for in a hot melt wax. Perfect for Road, Triathlon, Gravel, Mtb and E-bike. Keeps your drivetrain spotless clean. Can be used along with GRAPHENlube. It's the most quiet hot melt wax you will ever use. Unlike other Hot Melt waxes, GRAPHENwax not only exhibits lowest friction, but also lasts longer and is much easier to use. Usually after dipping the chain in melted wax you need to wait until chain cools down and then painstakingly break every chain link so the chain can be flexible again, leaving crumbled mess behind and particles on the frame and crank. With GRAPHENwax, we have reinvented this process. After the chain cools down, you only need to run it between your fingers along its entire length, and the chain is broken-in leaving no pieces of wax behind. Our wax simply doesn't crumble during the chain movement, meaning you have more wax that protects the drivetrain for longer. It can also withstand those hot days where other wax lubricants simply melt off your chain. GRAPHENwax will not stain your fingers when handling the chain and it's the quietest wax coating you will use. It's your "dream come true" wax lubricant. GRAPHENwax and our World Tour winning GRAPHENlube go very well together. If you plan longer rides you can "top it up" with GRAPHENlube. Chain will not require re-cleaning. Why we don't use Tungsten Disulfide (WS2) nor Molybdenum Disulfide (MoS2) additives. While these substances can exhibit super-low friction, they do it only in vacuum or inert gas. In normal humid air they not only have high friction but also very short life because of the rapid oxidation process. Using these additives in chain lubricant, where water is often present, is simply pointless. We also don't use any oils or paraffin oils in the mixture because it adversely impacts the friction. - 340g / 12 oz . +/- 4%. Each box contains 4 "squares" - Wax is black, but on the chain looks transparent. Doesn't leave marks. - Hydrocarbon waxes containing special mix of high-purity graphene. It does not contain any harmful solvents.
Zipp QuickView Integrated Mount for Service Course and SL Speed Stems
$70.00
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike. - Computer compatibility: Garmin, Wahoo - Accessory compatibility: GoPro - Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport - Lifetime warranty
XLAB Aero Cage Optimizer
$21.95
XLAB's Aero Cage Optimizer is a cool little device that mounts onto the bottle mounts on your frame or aero-bar or rear hydration system. Once in place, it lets you adjust your cage up, down, forward or backwards up to 1.75 inches so that everything fits and works the way you want it (cages sold separately).
XLAB Aero Computer Mount Gen 2
$15.95
With aerobars, short stems and hydration systems crowding the front end of your bike, it's hard to mount a computer. But, with Xlab's Aero Computer Mount Gen 2 you can mount your computer to your stem cap! It's aero because it fits neatly behind aero drink systems and horizontally mounted bottles, and the extra height of the mount makes your computer easier to read. It can also be mounted on the Xlab Torpedo Mini Mount, placing your computer in front in your line of sight. • The Aero Computer Mount, re-designed! Aerodynamically designed and longer to support larger screen computers • Mount in front of Torpedo Systems or on stem bolt • Helps reduce drag from a computer mount with one that was designed with aerodynamics in mind • Mount in front of TORPEDO SYSTEM (sold separately) for optimum viewing. • Mount on stem when using non-XLAB drink systems (sold separately) • Easy to read when in aero position • Fits most computers including the new longer form factor models (sold separately) • Mount is 37 mm wide. Plenty of room to support the popular Garmin computers (sold separately) • Includes hardware and instructions • Weight: 29.5 grams
XLAB Aero Pouch 300
$52.95
XLAB has designed the first aerodynamic repair storage bag for single rear systems with their Aero Pouch 300. It sports a compact, sleek design while carrying a great deal of essential repair tools. • Fits around the bottle cage on all metal XLAB single rear systems • Simple install by using the 2 bottle cage holes • Actually helps the drag behind you by collecting the air into a smooth airflow • Velcro zipper pull stays down to avoid zipper flapping drag Includes: • AERO POUCH 300 bag • All required hardware for mounting onto metal DELTA systems • Installation Instructions Material: • Tough woven nylon • Rigid insert to maintain shape • Weight: 107 grams Fits all metal XLAB single rear systems • DELTA 300 • DELTA 400 • DELTA 425 • DELTA SONIC • DELTA SONIC XL
XLAB Aero TT Cage and Bottle System
$74.95
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
XLAB C-Fast Computer Mount
$49.95
XLAB's C-Fast Computer Mount is the perfect mount to keep your computer in front and centered for quick and easy viewing. Adjustable every 5mm for the perfect fit, the C-Fast is compatible with all quarter-turn Garmin bike computers (sold separately). • CNC aerospace aluminum • Will be perfectly centered with aero extensions measuring 90, 100, 110, 120, or 130 mm center to center • Includes hardware and instructions • Weight: 30 grams
XLAB Delta 105
$55.95
Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.
XLAB Delta 400
$104.95
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
XLAB Delta 425
$99.95
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB Gorilla Carbon Cage
$64.95
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB Gorilla XT Carbon Cage
$69.95
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
XLAB Mezzo Cage Pod
$10.95
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
XLAB Mini Bag
$19.95
Xlab's Mini Bag is a small seat bag perfect for carrying the essentials. Can fit a tube, tire levers, inflator, patch kit, and two 16-gram CO2 cartridges. Small enough to tuck under your saddle or inside your Super Wing or Carbon Wing rear carrier. It's made from tough Cordura, is easily attached with the hook-and-loop straps, and it works with round and aero seatposts.
XLAB Nanoflator
$15.95
XLAB's Nanoflator CO2 inflator is small, light, easy to use, and built to last of light and durable aluminum. Simply thread on a CO2 cartridge (sold separately), press the Nanoflator on your valve, twist the black nozzle to inflate and you've got a full tire in seconds. Plus, the low-profile head works great on standard and disc wheels and fits all valve types.
XLAB Raptor Cage
$39.95
Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year
XLAB Raptor Talon Pair
$5.95
Colored talons for the Raptor Cage. Now you can finally match your cage to your bike at a low cost!
XLAB Rocket Pocket Bag
$25.95
Square top-tube boxes are not aero, so step in the Rocket Pocket! The streamlined design of the Rocket Pocket eliminates stem drag. The non-slip surface underneath provides sturdy nutrition storage. An easy-slide rubber zipper pull allows for a quick, easy open and close to keep your focus on the road. Silver interior lets you find your nutrition or salt tablets quickly. It can fit the longest energy bars
XLAB Sidekick Carbon Cage
$59.95 - $69.95
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB Space Saver Computer Mount
$18.95
• When aerobar space is tight, place your computer on top • Tuck straw on either side for best aerodynamics • Fits on TORPEDO SYSTEM 100, TORPEDO SYSTEM 400 & REFILL UPGRADE KIT BOTTLES (each sold separately) • Compatible with most computers, including large screens (sold separately) • Glass-reinforced nylon • Weight: 18.5 grams
XLAB Stealth Pocket 200
$30.95
The Stealth Pocket 200 mounts directly to your top tube on the bolt bosses found on some bike models. It has a 72 degree front that fits tight up against the stem to eliminate turbulent air pockets. The bag reduces drag caused by the stem and headset spacers (note: measure stem height to height of bag). The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. It features a specially designed insert to maintain the aero form of the bag to help you go that much faster!
XLAB Stealth Pocket 200xp
$33.95
No more fumbling for salt, electrolyte or Ibuprofen tablets. Stealth Pocket XP debuts four outside pockets for easy access to the small vitals that make the big difference. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. - Capacity: 20.4 in3 (334 cm3) - Weight: 2.3 oz (67g)
XLAB Stealth Pocket 300
$36.95
The Stealth Pocket 300 mounts directly to your top tube on the bolt bosses found on some bike models. It has a 72-degree front that fits tight up against the stem to eliminate turbulent air pockets. The bag reduces drag caused by the stem and headset spacers (note: measure stem height to height of bag). The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. It features a specially designed insert to maintain the aero form of the bag to help you go that much faster!
XLAB Stealth Pocket 400
$41.95
Do you have an integrated stem or have cables entering your top tube? Do you find that no bag will fit your bike? Introducing Xlab's Stealth Pocket 400. With 3 strong Velcro straps, the bag will mount anywhere on your top tube! Aerodynamically designed with a perfect 5:1 ratio which means no aero disadvantage. Testing has found without a Stealth Pocket 400, you lose up to 2 minutes in a race. Features a specially designed insert to maintain the aero form of the bag as you stuff it with your vital nutrition! Non-slip grip underneath bag ensures the bag stays put for up-front, easy access. Easy slide, dual rubber zipper pull allows you to get your nutrition however it is more comfortable for you. Silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Can carry up to 6 gels.
XLAB Stealth Pocket 500c
$48.95
Ultra durable outer showcases a ‘carbon-look’, stylish matte finish. Modern material deflects the elements maintaining high resistance to wear, perspiration and electrolyte drinks. The silver-colored interior makes it easy to see what’s inside quickly so you can turn your focus back to the road ahead. Mounts to top tube bosses. - Capacity: 23.2 in3 (380 cm3) - Weight: 2.7oz (76g)
XLAB Super Wing Dual Rear Carrier
$107.95
Carry your gear behind you tucked out of the wind with XLAB's Super Wing Dual Rear Carrier. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
XLAB Tire Mate
$29.95
XLAB's Tire Mate is a combined CO2 inflator and mini pump for complete peace of mind. It's so small that it fits into the smallest of our XLAB bags (sold separately) and it ensures that if you run out of CO2 cartridges you can still pump your tires up to 90 psi. When used as a CO2 pump, you can regulate how much pressure you put in your tires, too. This fine mini is built of CNC-machined aluminum for lightness and reliability. It has high-tech seals throughout, fits all valve types and even has a magnet to keep the pump closed when you're carrying it.
XLAB Torpedo Carbon Cage
$64.95
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
XLAB Torpedo System 50+
$54.95
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
Page 1 of 159 Next page