The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
High-performance simplicity. New carbon design leverages the groundbreaking, award-winning design of the Torpedo Kompact 100 for an even lighter weight, sleeker and more rough-road durable hydration system. - NEW unidirectional high-modulus carbon mounting plate - Includes NEW high-grip carbon Raptor Cage, color-customizable to suit your setup - Just add your choice of beverage: Includes hyper-reflective Cool Shot bottle to keep liquids super cool - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip brackets simply clip on and Velcro down to aerobars - On top Garmin computer mount gives quick-glance bird's-eye-view of your cycling data All Inclusive System - Comes with everything you need – mounting plate, Garmin-specific computer mount, cage and bottle No-Fuss Installation - Torpedo Kompact 500 comes fully assembled - No Zip-ties, rubberbands or need to concoct your own mounting solution required – simply click-on and Velcro-down - XLAB SecureClip brackets eliminate rattling and shifting. Fits 22.2mm diameter aerobar extensions. \ - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics) Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Kit-Match with a Color Customizable Cage: - Color match your bike kit! Insulated Bottle - Hyper-reflective Cool Shot insulated bottle keeps liquids super cool Highest Bottle Grip of Kompact Series - 6 lb grip force is durable for rough road conditions: Carbon anti-launch design increases grip force - Capacity: Includes 20oz (600ml) XLAB COOL SHOT insulated bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 154.4g (without bottle or computer) - Length: 145mm - Bottle Grip Force: 7lbs Construction - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Carbon - Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends - Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
XLAB's Turbo Wing Rear Carrier delivers options galore so you can easily attach bottles, a bag, CO2 cartridges, and everything else you need for any length ride, and keep it all neatly tucked behind you, out of the wind. There are also 15 different mounting options and you can keep it upright for low drag or invert it for easy access. Plus, it's made of light, strong aluminum, which means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps.
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Saving time wherever possible is important to a triathlete and the Tri-BackUp Pro I aids by mounting to the parallel section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Mount: Parallel rail section of saddle, Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Material: Pressed aluminum - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 12.5 x 8 x 4.8 cm / 4.9” x 3.1” x 1.9” - Weight: 97 grams
Designed specifically for saddle carrier mounting, the Tri-Cage Carbon is made from a carbon ber reinforced engineering grade polymer and the easy access “forward-release” design helps prevent accidental drops when reaching back for a bottle. An integrated bottom mount for Ninja T Road tool case, Ninja CO2 inflator, or Ninja Pouch Road spare tube carrier makes it easy to carry the essentials. Holds bottles up to 750cc. Recommended bottle diameter 72mm - 74mm - Material: Carbon fiber reinforced engineering grade plastic - Mount: Topeak Tri-BackUp hydration mounts or other rear hydration mounting systems - Cage Outer Diameter: Fits standard water bottle - Compatibility: Ninja TC Road, Ninja CO2 Ninja Pouch Road - Size: 15 x 8.2 x 7.8 cm 5.9” x 3.2” x 3.1” - Weight: 45 grams
An 8L hydration pack with the Thule ReTrakt hydration hose and a secure fit to eliminate movement on aggressive trail rides and enduro races. Features - Stay hydrated without slowing down using the hands-free ReTrakt magnetic hose return system - User-friendly 2.5L HydraPak reservoir features a slide closure for easy cleaning and a locking bite valve to prevent leaks before and after your ride - Superior stability with a secure fit for aggressive downhill riding and jumping - Improve bike handling and reduce muscle strain with optimal weight distribution thanks to the low center of gravity - Quickly store and retrieve pads, helmet, or chin bar with easy-access lash points - Easily access nutrition, clothing, or tools without having to remove the pack thanks to lower-back jersey pockets - Keep tools, pumps, snack,s and accessories organized in dedicated internal pockets - Stay visible with reflective details and a light attachment loop Technical specifications - Dimensions: 7.1 x 6.3 x 16.5 in - Volume: 8 L - Weight: 1.76 lb - Reservoir capacity: 2.5 L - Material: Nylon
Thule's Vital Hydration Pack 6L is a light and fast hydration pack perfect for high-intensity 2-5 hour rides. - Stay hydrated without slowing down using the hands-free ReTrakt hose return system - Quickly access nutrition, clothing or tools while riding without having to stop or remove pack thanks to convenient jersey-style pockets - Improve bike handling and reduce muscle strain with optimal weight distribution thanks to the low center of gravity - Stay hydrated on short or long rides with 2.5L Hydrapak reservoir - Carry extra food, clothing and tools with minimal bulk in 6L cargo storage - Maximize uphill and downhill performance with lightweight, ventilated materials - Protect a phone or sunglasses in the soft-lined, quick-access pocket - Secure keys or other small essentials in the interior zippered pocket - Stabilize and increase comfort on any terrain with sternum strap - Secure a tire pump and shock pump on designated interior loops
Surly's Insulating Sheath does exactly what you would think an insulating sheath would do. It sheaths things in insulation. - Made of 1/8-inch high density open cell foam - Appropriately sized for average beverage (12oz) cans
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
• Fits bars: 22.2 to 31.8mm diameter • No-Tool quick-release mount • Anodized finish
The SICURO Carbon Bottle Cage is produced using a highly optimized carbon lay-up that delivers exceptional bottle access and retention along with unique slotted mounting eyelets which allow fore/aft adjustability on the bike
Each SICURO Ti cage is hand-made in the USA at the Silca HQ in Indianapolis, IN headquarters using custom manufacturing processes and a state of the art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets which allow fore/aft adjustability on the bike. -Seamless 3-2.5 titanium tubing -Extended adjustment mounting - up to 16mm fore/aft -Low-profile 6-4 titanium mounting screws (1.5 grams each) -Weight - 29 grams w/o screws -SILCA Shield Warranty included covering your cage for 25 years!
The SICURO CAPSULE is dedicated piggyback storage for the SICURO CARBON water bottle cage. Designed to discretely store small essentials in an inconspicuous location. Effectively ‘free’ storage. The area below a seat tube water bottle and down tube water bottle is well suit for storage as it keeps the bike’s center of gravity low and sits in the dirty air wash of the spinning cranks. But unless your bike was designed with an integrated solution, options are scarce. The SICURO CAPSULE securely mounts to the bottom of the SICURO CARBON water bottle cage and features a magnetic lid to make the most of tight access. While limited in volume, the capsule will hold a road inner tube or combination of CO2, keys, and multi-tool.
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.
The RM-10 is designed specifically for bikes featuring the Ritchey 10mm Saddle Clamp standard. It enables the rider to replace the cylinder nuts that secure the clamp to the seatpost with a bracket that holds a hydration system. The Arch clamp allows for 14° of adjustment allowing the cage to slide under saddles with a transition tab. To add to the versatility this system can run 1 or 2 cages to customize for training or racing. - Replaces the cylinder nuts on the 10mm seatpost saddle clamp standard. - Multiple bolt placement along bracket for multi-saddle compatibilty - Patent pending arch clamp provides 14 degrees of adjustment - Armrest Material: 6061-T6 AL - Post Material: Steel - Adjustment: 14 degrees of tilt adjustment - Cage Material: Injected Nylon/Glass Fiber (Vise Cage) - Capacity: 1 or 2 cage compatible - Cage: Vise - Weight: 130G - Includes 1 lightweight Profile Design Cage Compatible Bikes - Cervelo P-Series - SCOTT Plasma - GURU - Stevens - Louis Garneau - Diamondback - Kestrel 4000 - Fuji D6/Norcom - BH Aero - Neil Pryde
This aluminum cage provides rigid clamping to keep bottles secure. - Fits 74mm bottles - Bolts included
The Pro Side Cage is an aluminum side-pull bottle cage designed for easy access to bottles with small frames and full suspension bikes while maintaining secure clamping. - Fits 74mm bottles - Bolts included - Weight: 46g
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
- Saddle rail mounted cages are a great solution for triathletes or anyone looking for more bottle cage options - Model SBH-300 Aluminum adapter clamps to saddle rails for dual bottle cage location behind the saddle, hardware included - Model SBH-80 Steel adapter clamps to saddle rails for single bottle cage location behind the saddle, hardware included
- Constructed using a 6mm aluminum rod - Embossed MSW logo
The Cannibal XC is a side entry fiberglass reinforced water bottle cage for situations where standard cages are difficult to use. -Works well with small and sloping frames
Page 1 of 7 Next page