Parts & Accessories
Xpedo cleat set for Xpedo M-Force pedals - Weight: 65g per set with hardware
The ATAC Easy cleats are specifically for the mountain bike pedal and City Bike range of TIME (LINK, MX and XC range). The release angle of 10-degrees is easy for riders who want a quick step out. - Weight: 44g/pair
The Xpresso Free float cleats have been developed for the TIME Xpresso Road bike pedal range. They allow angular and lateral freedom in order to respect the natural movements of your legs and joints. You can also adjust the Q-factor (by switching the cleats), in order to optimize performance following 3 points: security, ergonomics and performance. The Bi-material brings more durability when walking with the cleats. - Weight: 85g/pair
- SPD compatible - Single release - Hardware included
$16.99 - $29.99
Sidi's Caliper Buckles replace any Sidi ratchet system to get you back on the road. With precise tightening and simple loosening mechanisms, the Caliper Buckles keep your shoes secure. Retrofitting them onto older Sidis requires replacing the straps with Caliper Straps (sold separately).
Fits SP Carbon, Vent Carbon, Eleven Carbon/Composite, Millenium 4, Carbon Composite, and Carbon Lite soles
S-PHYRE Insulated Shoe Covers take advantage of our Shimano Fusion Concept System Engineering and Anatomic 3D design knowledge to construct a cold-weather cover that interfaces perfectly with S-PHYRE footwear. Flexible, one-piece, pull-on design delivers optimized waterproof protection and comfort in cold and wet training conditions. An added bonus of creating shoes and shoe covers as a system is that the Boa dials are readily accessible and adjustable without removing the covers, making mid-ride fine-tuning easy. Material 88% Rubber, 12% Polyamide Anatomic Construction 3D Anatomic patterned low cut openings for stress-free pedaling comfort. Wet Weather Ready Fully waterproof seam-sealed construction. Easy Cleanup Hydrophilic fabric for easy mud and debris clean up. Heat Retention METALLIC THERMAL TECH-Ti Neoprene retains heat and provides insulation from the cold and elements. Designed for Comfort Highly-stretchable neoprene and zipper-free construction for comfortable aerodynamic fit. On-the-Bike Adjustability Boa closure adjustment is accessible without removing shoe cover. System Engineered A shoe cover designed from the ground up to work with the shoe. System engineered for optimal interface with RC9 and XC9 cycling footwear.
S-Phyre Toe Shoe Covers are system engineered for a seamless interface with Shimano S-PHYRE RC9 and XC9 footwear and made specifically with variable conditions in mind. The S-PHYRE Toe Shoe Covers features an adjustment port that perfectly matches the Boa dial on S-PHYRE footwear for instant, on-the-fly adjustment. These versatile toe covers deliver cool weather protection and packability during quickly changing weather conditions. Windproof Designated windproof items significantly reduce the heat-sapping effects of wind. Aerodynamic Aerodynamic shaping reduces air resistance to support more energy-efficient riding. Materials Main body: 43% Polyamide, 30% Chloroprene rubber, 27% Elastane
Road shoe cover that utilizes thin, elastic, brushed lining for comfort as well as durable PU coating for rain protection. Features - Windproof softshell fabric with water-repellent coating - Optimal Panel Construction (OPC) with anatomic patterning for pedaling comfort - Highly-stretchable neoprene openings stretch for easy on/off - 3D toe box design matches the contours of road shoes - Reinforced material on toes - Waterproof zipper and taped seams - Road specific semi-closed sole for fit and functionality - Reflective elements for low-light visibility Material - Main fabric: 38% Polyamide, 33% Polyester, 14% Elastane, 11% Chloroprene Rubber, 4% Rubber (Polyurethane breathable windproofing & Water repellency)
These off-road shoe covers utilize thin, elastic, brushed lining for comfort and have a durable PU coating for rain protection. - Windproof softshell fabric with water-repellent coating - Optimal Panel Construction (OPC) with anatomic patterning for pedaling comfort - Highly-stretchable neoprene openings stretch for easy on/off - 3D toe box design matches the contours of MTB shoes - Reinforced material on toes - Waterproof zipper and taped seams - Off-road specific semi-closed sole for fit and functionality - Reflective elements for low-light visibility Material - Main fabric: 39% Polyester, 33% Polyamide , 12% Chloroprene Rubber , 9% Elastane, 7% Rubber (Polyurethane breathable windproofing & Water repellency)
These versatile toe covers utilize thin, elastic, brushed lining for comfort and have a durable PU coating for moisture protection. Features - Windproof softshell fabric with water-repellent coating - 3D-cut toe box matches the contours of cycling shoes - Specifically designed for road shoes - Toe area reinforced for durability Material Main fabric: 50% Polyester, 26% Polyamide, 9% Elastane, 8% Rubber, 7% Chloroprene Rubber (Polyurethane breathable windproofing & Water repellency)
Serfas' MTB Cleats are durable steel replacement cleats for use with Shimano SPD-compatible clipless pedals and shoes. They offer 4 degrees of float and weigh 73 grams per pair. If your old cleats are Shimano model SH51, SH55 or SH56, these replacements will work. Installation hardware is included.
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.
Let's get real; toe covers are a great way to deal with cold weather. They can be pulled over the toe of most cycling shoes and left on for the whole winter, and people do more miles on 45-degree days than they do on 25-degree days (even in Canada). Our toe cover uses our AmFIB softshell fabric to keep out the wind and rain and we positioned the band to sit behind toe spikes so that they will work with road or mountain shoes. Kevlar on the underside increases durability while the hook-and-loop closure makes the fit adjustable and the mounting quick. - AmFIB Softshell provides superior wind and water protection. - Innovative power-band secures front of shoe cover under toes. - Kevlar bottom with hook-and-loop closure allows easy on and off. - BioViz reflective elements for low-light visibility. - For road or mountain bike shoes.
For those cool days when rain forces you to cover your shoes, the H2O 2 knows no equal. This shoe cover offers extreme protection from torrential downpours. The bottom of the shoe is almost entirely covered while the top repels water and also blocks wind. DETAILS: - Neoprene cuff: Better fit that prevents infiltrations - Under sole: 2 openings with textured neoprene and reinforced rubber for enhanced durability - Rear opening: Rear zipper with zipper protector for easy slip on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
- 2 anti-slip platforms and 6 screws (4 x 17 mm) - Fit on all combined SPD and road outsoles - Convenient for stability and walking and are easy to clip on
If you're looking for one shoe cover to provide the most warmth for the harshest of conditions, then look no further. Good news! Your search for the perfect foul weather shoe cover is over! Introducing the Garneau Thermal H2O Shoe Covers (some minor "assembly" required). This seam-sealed, 3mm super stretch neoprene, fleece-lined shoe cover is 100% wind and waterproof, and will keep your toes warm in the nastiest of weather! Its outsole is made out of rubber for additional traction, and can be cut to fit whatever type of cleat you have using the integrated cutting guide. We round it out with a seam-sealed zipper that tucks into a zipper garage and hits of reflectivity that offer additional visibility in low light conditions. Technical Details - Under Sole: Durable pre-cut rubber sole for better water resistance - Opening: Sean-sealed zipper for all weather conditions - Shoe Cover Fabric: super stretch neoprene laminated with fleece
Protect your feet from the elements with the Thermax II. This shoe cover provides high insulation from the cold and is very water resistant. The Thermax II offers maximum visibility thanks to reflective accents located at the front, rear and side. DETAILS: - Fabric: All seam-sealed 3 mm super stretch neoprene laminated with fleece - Under sole: Under opening with Velcro for easy adjustment and reinforced rubber for durability - Side opening: Side Velcro with safety puller for easy slip-on/off - HiViz360: Reflectors at rear, front and sides for optimum visibility
The in-between solution to protect your feet on those chilly days. FABRICS: -ISO LITE: Provides warmth in cool weather -ANTISLIP 3 MM NEOPRENE : Isolates from cold, provides warmth and durability DETAILS: -Cleat opening under sole -Flatlock seams: Enhanced comfort -Reflective puller
The Transfo 3D Insole is quite simply the lightest insole on the market. Offering a simple and easy way of customizing the arch support that your foot receives, this is an innovative means of improving overall comfort on the bike and reducing the chance of long-term injury. Simply remove and replace the inserts based on how much arch support your foot requires. The non-slip surface of the underside of the insole locks it in place against the footbed of the shoe, while the Ergo Air ventilation system preserves airflow. The insole can be adapted to all types of cycling shoes, for both men and women. - Unisex - Arch support: Low/Med/High adapted arch profile ensures maximum foot contact for optimal support - Ergo Air: Provides through-and-through ventilation - Removable arch: Patent-pending anchoring system allows for an easy and customized adjustment - Under insole: The non-slip surface maintains insole in place
The fi'zi:k toe cover's light, comfortable, water resistant PU-cloth upper is mated to a hard-wearing, waterproof reinforced PU fabric sole. With its Microfiber toe cap and puller and this elastic binding it's comfortable, easy fitting and doesn't interfere with your cleats. A reflective fi'zi:k logo aids visibility and a range of sizes are available to suit all riders. Specifications - Windproof and Water Resistant upper (PU, Nylon & Polyester) - Reinforced PU fabric sole, Toe Cap & Puller - Thin elastic binding - Reflective fi'zi:k logo - Color: Black Sizes - X-Small/Small: Sizes 36-40 - Medium/Large: Sizes 41-44 - X-Large/XX-Large: Sizes 45-48
fi'zi:k Winter Overshoes are designed in collaboration with professional cyclists and offer the best possible performance in the cold, wet months – they wrap around your shoes giving excellent comfort, performance and safety during every ride. The waterproof and windproof 3L upper material features a membrane and bonded mesh, thermowelded seams and a waterproof zip. The rubberized outsole provides improved grip while the reflective logo and piping offer high visibility. Specifications: - 100% Waterproof and windproof upper - 3L material with membrane and bonded mesh, waterproof YKK zip - Waterproof thermowelded seams - Rubberized outsole for better grip - Reflective logo and piping - Color: Black Sizes: - Small: Sizes 36-39 - Medium: Sizes 40-43 - Large: Sizes 44-46 - Extra Large: Sizes 47-49
Exustar Cleats compatible with Look Keo System - Engineering carbon fiber injection body - Weight of 24 grams per cleat - 7-degree floating arc
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Anti-slip walk pads - Fixed position with no float
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Look Keo System - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 45 grams/pair
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with Exustar cleat C01, C03, and C05 - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 14 grams/pair
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers. - Compatible with EPS-SL cleats (Shimano SPD-SL-style) - Durable and flexible rubber - Can be used with either floating or fixed position cleats - Weight of only 86 grams/pair
- Shimano SPD-SL-style - Engineered thermoplastic injection body - Weight of 24 grams per cleat - 4.5-degree floating arc
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
Page 1 of 2 Next page