Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. The streamlined, seamless look is achieved with the aero Rapid aluminum load bar. But these aren't just sleek looking, the aero design cuts down on wind resistance and noise. Your car's rails are fully protected thanks to the integrated rubber lining. And you get maximum rack strength and a custom fit from the rubber-coated steel straps.
Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.
$59.95 - $74.95
Thule's Thru-Axle Adapter allows you to carry bikes with through-axle front forks on Thule and most other fork-mounted bike carriers.
Premium aerodynamic load bars for an exceptionally quiet ride and easy installation of accessories. 2-pack. - Load bar for Thule Evo roof rack system - WindDiffuser technology disturbs airflow to reduce noise and drag for improved fuel economy - TrailEdge design reduces aerodynamic drag by allowing clean air separation from bar - SmartSlides slidable length scale doubles as an under-bar aerodynamic cover, providing quick, no-hassle rack installation - SwingBlade end cap pivots open to allow full access to the T-slot for easy accessory installs - Upper T-track with QuickAccess interface allows smooth installation and removal of accessories - BoxBeam internal structure creates an exceptionally strong load bar - Check the Thule Buyer's Guide for your vehicle's recommended bar length - 135cm / 53 in
Sunlite's versatile Bike Block Quick Release Fork Mount is a handy bike mount that you can install in your vehicle, pickup truck bed or on virtually any flat surface. It features a sturdy 9mm-diameter quick release to securely support your 2-wheeler by its fork. And, the Bike Block is made of heavy-duty metal for strength and reliability. Plus, it features a pass-through hole for locking your rig with a cable lock, too.
If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.
A Leg Above the Rest The Bones trunk rack made a name for itself in the mid-90's, and 25 years later it's doing it again. How? By expanding its vehicle compatibility to fit 20% more of the most popular vehicles, including those with spoilers. Featuring a unique arched leg, the Bones EX gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs. This simple, yet game-changing design by Fabio Pedrini transformed the iconic trunk rack into one that could fit 90% of the top 50 vehicles sold in the USA. Equipped with premium bike hold downs and a streamlined strap management system, the Bones EX is penning its own chapter in history books. And just like its legendary predecessor, the Bones EX is made in Madison, Wisconsin, USA, with locally sourced materials that'll last a lifetime. Features - Carries 2 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
For 2" hitches, this extension gives you more clearance for your bike rack or trailer away from the vehicle. The insert tube is threaded, by bolting in the extension, you get rid of 80% of the play and rattle vs extensions that use a pin. Included is the 8" extension, hitch bolt, and lock pod. Allows BackStage, MonoRail & SplitRail racks to fold flat on Wrangler and other cars with spare tires. Works well with all bike racks including Thule, Yakima, and Kuat. As with all hitch extensions, they lower weight ratings by 50%, confirm you are within specifications before use. -Electroplated plus powdercoat for best rust resistance -Welded steel construction -Includes lock, two keys & wrench for installation -Fits 2" Hitches only -Maximum Trailer Weight- Lower amount of 3500 lbs OR 50% maximum listed on your trailer hitch -Maximum Tongue Weight- Lower amount of 350 lbs or 50% of maximum listed on your hitch. (For use with bicycles, Tongue Weight is your guide, not Trailer Weight)
The RockyMounts HotRod is a do-it-all truck mount for bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
RockyMounts StreetRod is a thru-axle adapter that works with fork-mounted bike racks from any manufacturer. It includes axles to accommodate bikes with 12x100, 15x100, and "Boost" 15x110 thru-axles.
Origin-8's Bike Block Fork Mount can be mounted to almost any flat surface and securely holds your bike by the fork. It's made of sturdy steel and works with quick release 9mm dropouts as well as 15mm and 20mm through axles!
We've all had a friend like The Dirtbag at some point in our lives. He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.
The all-new aluminum Sherpa 2.0 resets the standard for user-friendly adventure. Folding tire cradles create an abundance of clearance while Kuat's foot-actuated pivot lever lets you bask in the glory of carrying a bike or eating a breakfast burrito while unfolding your rack at the same time. With features designed around your lifestyle, this lightweight rack is as easy to take off as it is to leave on. - Re-designed pivot with optional foot assist - Semi-integrated bike lock - Front tire ratchet design with an intuitive release - Rear tire cradle features a co-molded strap to protect wheels - Folding front cradle adds space between rack and vehicle - No-tool install with hand tight hitch cam system - Gloss metallic powder available in 3 colors - Low profile arced design delivers an amazing look - 2 Bike capacity up to 40 lbs. each - Holds wheelbases up to 47-inch and tires as large as 3-inch - Increased spacing between bikes to 14-inch - Lightweight platform rack design as low as 32lbs (assembled) - Available in both 2-inch & 1.25-inch hitch sizes
Kuat's Transfer 2 offers all the Kuat quality you'd expect at a price that appeals to privateer racers and weekend riders alike. It fits both 1.25 and 2-inch trailer hitches and its stout steel construction won't leave you hanging, or your precious cargo bouncing around on the road. Bikes mount securely and easily with an adjustable locking arm and wheel tray. Best of all, there's no contact with the frame so your bike will come off the rack looking just as good as when you put it on. The wheel trays hold up to a four-inch-wide tire and the rack holds bikes with wheels anywhere from 20 to 29 inches.
Transfer cable lock kit including one locking cable per tray and a matching lock for the hitch pin.
Thru-axle adapter for the Kuat TRIO rack.
A fork hitch for bike transportation that allows for versitle mounting options on any flat surface. - Pre-aligned positioning for easier fork installation - Remove Boost 15 x 110mm insert to accommodate 20mm axles - Easy mounting to any flat surface - Rust-free Aluminum construction - The platform is 3.75 x 1.5" and the holes are 3" center to center Compatible with following: 15 x 110 mm (Boost, silver insert) 15 x 135 mm (Borealis, Fatback, 9zero7 + other Fat Bike forks) 15 x 142 mm (Salsa + others) 15 x 150 mm (Rock Shox Bluto Fork + others) 20 x 110 mm
- For carrying unique frames on hang-on type car racks - Quick release clamp adjusts to fit between stem and seatpost - Rubberized hooks protect bikes finish
- Rigid 6061-aluminum body with 9mm skewer
The 12 x 100 mm thru-axle adapter allows modern road bikes to quickly secure to any traditional 9 mm fork mount bike tray. A simple thru-axle adapter that allows modern road bikes to quickly secure to any fork-mount bike rack. - 12mm x 100mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
$39.00 - $49.00
If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Tailor your towers - these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car's naked roof.
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install
When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).
Rear wheel strap for Boa bike mount. Includes one strap.
Page 1 of 12 Next page