Riser

Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward

An adventure bar from Ritchey. Extra wide with subtle rise and sweep, these bars are perfect for handling dodgy terrain while packing a week's worth of supplies. - 6061 alloy - Bar Clamp Diameter: 31.8mm - Width: 800mm - Rise: 30mm - Back Sweep: 27 degrees - Upsweep: 27 - Weight: 355g

The Ritchey Classic Rizer handlebars are a refined version of its high-performance predecessors featuring a classy high-polish silver finish.

- 6061-T6 polished aluminum finish in black or silver - Grip Area Diameter: 22.2mm - The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers - Bends forward 22-degrees before bending backwards - A design collaboration with Dream Cycle Vancouver

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g

- Narrow profile, fixie-riser bar with an oversized clamping area - 6061-T6 aluminum alloy construction - 53cm width with graduation marks to 38cm to ensure accurate cutting

A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°

Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design

TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

We set out to make a handlebar that’s upright, durable, and capable of resurrecting a parts-bin bike or transforming a newer slice of steel into something more. What we came up with is the Sunset Bar. We liken it to its sibling, the Sunrise Bar, with BMX-inspired style and vertical posture. Procure one yourself for a fresh take on front end grip. - Constructed with 4130 Chromoly Custom-Butted Steel tubing for enhanced strength and comfort, and finished in an anti-rust Black ED coat for longevity - Brings comfort, style, and durability by fitting a more upright position with 110mm of rise, 22-degree backsweep, and 14-degree upsweep - Adds height to frames with short steerer tubes or headtubes - Tested to comply with ASTM 3 and ISO Mountain Standards for rowdy trail riding and beyond Specifications: Material: Post-weld heat-treated Chromoly Steel Clamp Diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm Rise: 110mm Sweep Angle: 22 degree backsweep, 14 degree upsweep Weight: 827g including shims Color: Black

Double butted, tapered, shot peened 6061 aluminum

- The Comp Buzzard features a 70mm flat rise - Offers a more upright riding position for comfort when touring or bikepacking ‚ especially on bikes with a lower stack height - 820mm wide and a 27.5-degree backsweep offer plenty of control\n- Bar end compatible - Double-butted 6061 alloy - 376g

The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise

- Narrow aluminum riser bar for urban use (not recommended for freestyle)

Answering a call from the wild and satisfying the style-conscious among us, the new Classic Kyote is the latest offering from Ritchey for adventure riding and bikepacking. Featuring a super-comfortable 27.5-degree sweep and 35mm rise, the Kyote bar is perfect for skirting ridge lines, cutting trails, and exploring near and far. With a plentiful 800mm width, there's lots of space for bags, lights, and navigation, while the Kyote's rise and sweep offer a natural hand position for comfort and control—even when loaded with gear. Featuring the timeless high-polish silver finish, the Kyote represents Ritchey's deep heritage with handlebar design and a never-ending quest for adventure. Embrace the Kyote, and chase the ultimate adventure experience. - Designed for adventure and bikepacking - Classic high-polish silver finish - 800mm wide for control and plenty of space for bags, lights, etc. - Material: double-butted 6061 alloy - Width: 800mm - Rise: 35mm flat rise - Backsweep: 27.5° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 360g

- Ultra-versatile, multi-use 31.8mm bar can be used on a wide variety of builds- XC, Gravel and Urban bikes - Constructed from 6061 T6 spiral butted tubing making the Beard bar lighter yet not sacrificing any strength while staying comfortable - 750mm wide, 31.8mm clamp - 17mm rise, 40 degrees back sweep, 20-degree upsweep

- Constructed of 7050 aluminum and features built-in bar plugs for added safety. Bar diameter is 15.5mm, works with J-Unit grips only

Inspired by the classic V-Cross BMX bars from the 80s - Constructed from butted 6061-T6 Aluminum - 820mm width, can be cut to 720mm if desired

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection

CrMo with internal taper for best strength-to-weight

CrMo with internal taper for best strength-to-weight

Odyssey Shortcut BMX Handlebar - Butted 20mm crossbar - 1.8/1.3mm thick, multi-butted main tubing - Large radius bends for greater durability - Post-weld heat-treated for added strength

Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black

Spiral butted tubing technology is game changing tube extrusion that is more durable, stronger and less weight - 7075 heat treated spiral butted aluminum - Updated graphics and an additional 50mm rise option

- Custom swaging process results in the ultimate strength-to-weight ratio - Wide 7075 bars with a 35mm clamp area, 5 degree upsweep and 8-degree backsweep - Features two-tone decals with easy-cut markings

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep