Full-Suspension

Any Trail, Any time. With the Genius 930, this phrase has never rung truer. With our TwinLoc Suspension System to always optimize your ride, a SRAM Eagle drivetrain and Syncros components, the 930 will get you up and down the mountain without breaking the bank. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Genius Trail Geometry - The Genius has always been a bike designed to go up as well as it went down, and vice a versa. For 2018, we wanted to re-emphasize this point. We designed the Genius specifically in search of balance. Compared to the previous iteration, this one is slacker, has longer reach, shorter chainstays and a steeper seat angle. We really wanted geometry figures that would balance out the long front end for more stable descending. What we've ended up with is a bike that climbs like a bat out of hell and gets you down the mountain faster than you can say "dropping!" After years of testing different options, these numbers are a result of taking everything we want out of a bike for the trails we ride, and building it. - Genius Carbon HMF-Alloy Frame - FOX 34 Float Performance 150mm Fork - FOX Nude T EVOL, TwinLoc, 150mm - SRAM NX Eagle 12 Speed - Shimano 4 Piston Disc Brakes - Syncros Revelstoke 2.5 TR Wheels - Maxxis Kevlar Tires - Syncros Dropper Post and Parts

The SCOTT Spark 920 boasts a super-light HMF Carbon Fiber mainframe with an Alloy swingarm. The 920 comes equipped with a custom FOX Nude shock, a SRAM Eagle 12-speed drivetrain and our TwinLoc Suspension System to always optimize your ride. This bike is ready for any trail in your near future. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. Key Features - Spark Carbon HMF-Alloy Frame - FOX SC 34 Float Perf. 120mm Fork - FOX Nude EVOL, 120mm, TwinLoc - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Kevlar Tires - Syncros Dropper Post and Parts

The Contessa Ransom. 170mm of trail munchin', climb crushing, stage winning all day pinning mountain biking excellence. The Contessa Ransom 910 comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset and Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX-Alloy Frame - FOX 36 Float Perf. Elite 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM GX Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 2.0 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros Parts

The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. Taking years of racing development and mixing it with our carbon expertise, this bike is our answer to the needs of white-knuckle downhill racing. The Gambler, Simply Fast. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheels - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler HMX Carbon-Alloy Frame - FOX 40 Performance Elite 203mm Fork - FOX DH X2 200mm Shock - SRAM GX DH 7 Speed - SRAM Code R disc brakes - Maxxis Assegai 2.5" DH Tires

The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 920 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - FOX 40 Performance Elite 203mm Fork - FOX VAN RC 200mm Shock - SRAM GX DH 7 Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires

The all NEW Gambler was designed for one thing and one thing only—pure, unadulterated speed. We made it to get you to take lines you'd never thought imaginable, to make you want to go to the bathroom before your race run - twice. We made it so that when you drop out of the start gate, the only aspect holding you back will be, well, you. The Gambler 930 is the lightweight alloy DH bike of your dreams, and it too is simply fast. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One Frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. 29" Wheels - Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Gambler Alloy Frame - RS Boxxer Select 200mm Fork - X-Fusion Vector R 200mm Shock - SRAM X5 8-Speed - Shimano 4 Piston disc brakes - Maxxis Assegai 2.5" DH Tires

The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 900 Tuned features our TwinLoc Suspension System to always optimize your ride. With a SRAM Eagle AXS Wireless drivetrain and Syncros components, the Tuned is your go to for all day mountain trail huntin'. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffnessand avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMX Frame - FOX 36 Float Factory 150mm Fork - FOX Nude TR EVOL, TwinLoc 150mm - SRAM X01 AXS Eagle 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke Carbon Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros CF Parts

The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 900 Ultimate features a FOX Live Valve electronic suspension system, an SRAM XX1 AXS Wireless 12 speed Drivetrain and XTR brakes, alongside carbon wheels and components. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. One frame Two Wheel Sizes - With our mountain bikes, we try to achieve ultimate versatility. These specific models can switch from 27.5" to 29" wheels with nothing more than the flip of a chip. No need to change the fork, all you need to do is flip a shock mount chip, change your wheels and off you go. The flip chip allows us to maintain a similar BB height when switching from one wheel size to the other which is key to keeping handling similar for both wheel sizes. With 27.5" wheels, you can run either 2.5", 2.6" or 2.8" tires. For the 29er, anywhere from 2.4"-2.6" is good to go. Key Features - Genius Carbon HMX Frame - FOX 36 Float Live Valve 150mm Fork - FOX Float Live Valve EVOL, 150mm - SRAM XX1 AXS Eagle 12 Speed - Shimano XTR 4 Piston Disc Brakes - Syncros Revelstoke Carbon Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros CF Parts

The Genius was put on this earth to get you up mountains with ease and to get you back down them in a flash. The Genius 910 features our TwinLoc Suspension System to always optimize your ride. With a Shimano 12-speed drivetrain and Syncros components, the Genius 910 is action ready. Any Trail. Any Time. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Genius Carbon HMF-Alloy Frame - FOX 36 Float Perf. Elite 150mm Fork - FOX Nude TR EVOL, TwinLoc, 150mm - Shimano XT 12 Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Kevlar Tires - FOX Dropper Post, Syncros Parts

The Ransom. 170mm of trail-munchin', climb-crushing, stage-winning, all-day-pinning mountain biking excellence. The Tuned version comes equipped with our TwinLoc Suspension System, a SRAM Eagle groupset, and high-end Syncros components to help you get away with murder, regardless of your ability level. Evo-Lap Technology With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super-light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Ransom Carbon Construction While we always aim to have lightweight carbon bikes here at SCOTT, we never compromise frame strength when doing so. Taking into consideration the riding this bike is designed for, we have created our strongest carbon frame to date. Through clever layering and reinforcement in certain zones we obtain the stiffness wanted between the head tube and the rear wheel axle via a path following the downtube and the chainstays - we call this the stiffness backbone. The Ransom being a 1x only bike allowed us to optimize the width of the main pivot which is normally the weak point on this stiffness path. Additionally, the Trunnion mount on the DT close to the BB allows us to obtain great stiffness at the bottom of the bike and lightweight construction up top for compliance and for having the center of gravity as low as possible. Fox Nude TR Shock - On several Ransom and Genius models, you'll find the all new FOX NUDE TR EVOL. What the TR allows you to do is to select what sort of progression you would like in Descend mode: more linear, or more progressive. By flipping the Ramp Adjust Lever, you can decide how your shock behaves while descending. - A more linear shock gives a rider the same amount of support throughout a shock's travel. The suspension is supple throughout, and is "easier" to reach the end of the travel, or "bottom out." A more progressive shock will offer more support towards the end of travel, and is harder to bottom out. - These settings are really linked to riding speed. When it is wet, techy, or when impacts are small and riding tends to be slower, one might favor the more linear setting. When the conditions are dry and fast, or when bigger impacts are in play (jumps for instance), then the progressive mode is ideal. With the NUDE TR Evol, choosing and changing is easy. Key Features - Ransom Carbon HMX Frame - FOX 36 Float Factory 170mm Fork - FOX Nude TR EVOL, TwinLoc, 170mm - SRAM X01 Eagle 12-Speed - Shimano XT 4 Piston Disc Brakes - Syncros Revelstoke 1.5 TR Wheels - Maxxis Minion DHF Kevlar Tires - FOX Dropper Post, Syncros CF Parts

The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts

The SCOTT Spark 910 boasts a super-light Carbon Fiber mainframe with an Alloy swingarm. The 910 comes equipped with a Shimano 12-speed drivetrain, a custom FOX Nude shock, and our TwinLoc Suspension System to always optimize your ride. This bike is ready for any trail in your near future. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. 29" Wheels Improved roll-over is the most noticeable attribute when it comes to 29” wheels. The big wheels are great for rolling over nasty roots and rocky sections, essentially making it easier to ride these conditions. Improved traction is also a key factor with the increased wheel diameter compared to 27.5” wheels as tire contact to the ground is larger. - Best Roll-Over Performance - Carries Momentum - Maximum Traction surface - Best stability on easy trails - Lowest suspension stress - Great for larger frame sizes - Increase stability on long curve Key Features - Spark Carbon HMF-Alloy Frame - FOX 34 SC Float P. Elite 120mm Fork - FOX Nude EVOL, 120mm, TwinLoc - Shimano XT 12 Speed - Shimano XT Disc Brakes - Syncros Silverton 1.5 TR Wheels - Maxxis Rekon Kevlar Tires - FOX Dropper Post, Syncros Parts

Anyone who ever dreamed of a pro cross-country racing career has dreamed of the Spark RC 900 Pro. The 1x-specific Spark RC frame design and lightweight, hyper-efficient TwinLoc Suspension System are made for pure, on-course performance. The Pro build includes a Shimano XTR 12-speed drivetrain and XTR brakes, and is made to go the distance with premium Syncros components completing this race-worthy package in style. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefited from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Asymmetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off-setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - Shimano XTR 12 Speed - Shimano XTR Disc Brakes - Syncros Silverton 1.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts

Having already written itself into the history books, the Spark platform has been revamped, and is faster and fitter than ever. With the lightest frame in the RC series, the SL version comes equipped with a FOX 32 SC Fork, a SRAM Eagle AXS 12-speed wireless drivetrain, and a host of Syncros carbon components that will make any rider feel like they can go toe to toe with the world's finest. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Key Features - Spark RC Carbon HMX SL 1799g Frame - FOX 32 SC Float Factory 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM XX1 AXS Eagle 12 Speed - Shimano XTR Disc Brakes - Syncros Silverton 1.0 SL CF Wheels - Maxxis Rekon Race Kevlar Tires - Syncros SL Carbon Parts

The Spark 900 RC Team features a slew of high-end components in an affordable package. Our TwinLoc Suspension System, a 12-speed SRAM Eagle drivetrain, Shimano brakes and Syncros components combine to create a dream-worthy carbon full-suspension race bike. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Asymmetric Design - The Spark down tube shock and linkage are clearly asymmetric, when looking from the top of the bike. Carbon fibers achieve their full potential when used in smooth straight lines. Off-setting the shock slightly to the left hand side of the bike gives a clean and continuous structure from the down tube through the shock mount to the main pivot. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, TwinLoc Susp. System - SRAM GX Eagle 12 Speed - Shimano SLX Disc Brakes - Syncros Silverton 2.5 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Parts

With the Spark RC Team Issue AXS, take your World Championship dreams and start making them a reality. The fastest frame on the market, a wireless SRAM 12-speed groupset and Syncros components combine to give you the perfect tool for the job, whether you're racing a local weekend race or toeing it up for your first World Cup. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA(finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. TwinLoc Suspension System - With TwinLoc, a rider can effectively control the complete frame, fork, and shock as a system. Why does this matter? A bike with 150mm of suspension travel, correctly set up, has more sag than a bike with 130mm. It's that extra travel that makes it more fun to ride and more capable on the descents, but the greater sag has an oversized effect on the bike's geometry and climbing performance. That's where TwinLoc matters. - TwinLoc helps manage the sag effect in several ways. Whereas most systems only increase low-speed compression in an effort to gain pedaling efficiency, TwinLoc allows us to not only change compression damping, but also to change the spring curve, dynamically altering the geometry of the bike. In Trail mode, the shock is not only firmer, but it has dynamically less travel. The bike sits higher, maintains a steep seat angle for those climbs, and becomes more agile. We also offer a third, full lockout mode for going up in the most efficient manner possible. - These unique settings optimize climbing geometry, even on longer travel bikes. We can eliminate the "long travel effect" that can rob your pedaling efficiency, but we're not robbing you of the full-fun, 150m travel when you point it downhill. From a race setting, to a lunch ride, to an after work trail shred, being able to switch from mode to mode depending on a trails profile at the push of a lever is paramount to riding faster and having a damned good time. Key Features - Spark RC Carbon HMF Frame - RockShox SID Select+RL3 100mm Fork - FOX Nude EVOL, 100mm, TwinLoc - SRAM X01 AXS Eagle 12 Speed - Shimano XT Disc Brakes - Syncros Silverton 2.0 TR Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts

The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Select+ fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM X01 Eagle 12-speed drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. Key Features - Spark RC Carbon HMX Frame - RockShox SID Select+RL3 100mm Fork - RS Nude RL3, 100mm TwinLoc - SRAM X01 Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts

The Spark RC 900 World Cup is a cross-country full-suspension bike on a mission to win. Keeping the ride smooth, a RockShox SID Ultimate fork is paired with a custom RockShox NUDE 3-mode rear shock via our TwinLoc Suspension System. The SRAM Eagle AXS 12-speed wireless drivetrain will move you up the trail and SRAM Level disc brakes will slow you down when it's time to step onto the podium. Evo-Lap Technology - With the proper selection of materials, eighty percent of the work to create a frame is done. But the remaining twenty percent requires most of our efforts. For this reason, our choice of the most advanced carbon fibers in the market is followed by intensive use of specific tools, like FEA (finite element analysis) software, to map out the carbon lay-up. - With FEA software, we can simulate different forces on a virtual model of the frame and adjust the frame construction accordingly. FEA software enables us to create complete virtual prototypes incorporating all the physical phenomena that exist in real-world environments. - With our Evo-Lap technology we model the frame to optimize the surface area, simulate tube structures with different ply orientations, observe the results of using different configurations, and test the stress distribution in different areas of the frame. Thanks to this extensive computer modeling, we’ve optimized the carbon layers in all the parts of our frame. When the parts were bonded together in the first prototypes, the result was a super light and compact frame without a sacrifice in the stiffness, comfort or impact resistance. The entire range benefitted from our EvoLap technology. ICCR Cable Routing - On the Scale, Spark, Genius and Ransom, to provide a clean look and a functional solution for all the different control cable standards on the market, cable routing is fully internal and designed for full-length cable housing. Routing the cables internally omits bulky external hardware and looks cleaner. The cables can endure a longer lifetime as they are protected within the frame. The entry points are machined alloy removable inserts that come along with the frame and can be chosen according to the setup of the bike. Assembling an electronic group or a dropper post will not be a problem and the look will always be clean-cut. SW Dropouts - On the Scale, Spark, Genius, Ransom and Gambler we’ve redesigned all the parts that can give us significant benefits in terms of performance and functionality. On the previous model the support of the dropout was a bulky additional part molded to the carbon chain stay. The new dropouts are designed to be integrated on the thru-axle system thanks to a hollow tubular design that allows a simple and light weight structure. Available for SRAM and Shimano DM derailleurs, this dropout increases the stiffness and avoids damage to the frame in case of impacts on the rear derailleur. Rocker Link - The Spark carbon linkage is constructed with a compression molding process. It’s 37g lighter than the aluminum equivalent and half the weight of the previous Spark linkage. Making the link in two pieces means all excess material can be removed from the inside of the linkage, without sacrificing stiffness. Key Features - Spark RC Carbon HMX Frame - RockShox SID Ult. RLC3 100mm Fork - RS Nude RLC3, 100mm TwinLoc - SRAM XX1 AXS Eagle 12 Speed - SRAM Level TLM Disc Brakes - Syncros Silverton 1.0 Carbon Wheels - Maxxis Rekon Race Kevlar Tires - Syncros Carbon Parts

Any Trail, any time. With the Genius 940, this phrase has never rung truer. With our TwinLoc Suspension System to always optimize your ride, a SRAM Eagle 12-speed drivetrain, and Syncros components, the 940 will get you up and down the mountain without breaking the bank. Key Features - Genius Carbon HMF-Alloy Frame - FOX 36 Float Rhythm 150mm Fork - FOX Float, TwinLoc, 150mm Shock - SRAM NX-X1 Eagle 12 Speed Drivetrain - Shimano 4 Piston Disc Brakes - Syncros X-30S TR Rims - Maxxis Kevlar Tires - Syncros Dropper Post and Parts

Everything you love about the Genius, but with a lower price point. The Genius 960 features TwinLoc Suspension Technology to always optimize your ride, a SRAM Eagle drivetrain, and Syncros components. Grab your bike, and get on the trail. Key Features - Genius Alloy SL Frame - Marzocchi Z2 Air 150mm Fork - X-Fusion Nude, TwinLoc, 150mm Shock - SRAM NX-SX Eagle 12 Speed Drivetrain - Shimano Disc Brakes - Syncros X-30 TR Rims - Maxxis Kevlar Tires - Syncros Dropper Post and Parts

The SCOTT Spark 940 has a super-light carbon/alloy frame. It features a custom FOX Nude Shock, SRAM Eagle 12-speed drivetrain, and our TwinLoc Suspension System to always optimize your ride.  Key Features - Spark Carbon HMF-Alloy Frame - RockShox Revelation RL3 130mm - FOX Float, 120mm, TwinLoc - SRAM NX-X1 Eagle 12 Speed Drivetrain - Shimano Disc Brakes - Syncros X-25 TR Rims - Maxxis Rekon Kevlar Tires - Syncros Dropper Post and Parts