Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$309.99
Portable bicycle pressure washer with three lances, custom waterproof bag, cleaning solution, Bike Protect, Drivetrain Cleaner and C3 Ceramic Lube. Water supply is required. - Includes 3 lances; 1 for bicycles, 1 for motorcycles (higher- pressure), 1 bespoke (adjustable higher presser) for heavy grime, custom waterproof dry bag carry case - Also includes snow foam lance for Muc-Off Nano Tech Bike Cleaner creating a thick snow foam for deep cleaning - Weight: 15lbs - Intended for use with cold water only
$305.88
Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.
$289.95
The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
$280.99
Click-Torque wrench in the unmistakable, robust Wera design with high accuracy. Easy setting and saving of the default value. The audible and tactile clicks on reaching the scale values also facilitate the safe setting of the desired torque value. For right-hand use (clockwise torque control) and with 45-tooth reversible ratchet mechanism. - With 1/4" square drive, reversible ratchet, 45 teeth - Easy setting and saving of the desired torque value with audible and tactile clicks when reaching the scale values - Audible and tactile release mechanism when the set torque value is reached - Measuring range: 2.5-25 Nm; Precise to +/- 4% - Designed with ergonomic 2-component handle suitable for right-hand use
$272.00
- 11 speed compatible - Allows removal, installation and peening of rivets
$145.02 - $271.32
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
$269.95
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life
$269.00
The lightest production damper. Ever. Performance packed with a rock-solid lockout to power up climbs and smash through sprint finishes. - Every detail machined and optimized to save on weight and maximize your performance - Factory tuned compression (in open position) provides the highest level of XC performance, precision and control - Maximum efficiency with a rock-solid lockout
$268.95
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.
$266.99
- The Pro bearing punch tool-kit allows fast removal of bearings in suspension linkages and hubsets. - The steel punches locate on the inside diameter of a bearing in order to drive the bearing out of the bore. - The bearing punch kit includes 8, 10, 12, 15, 17, 18 and 20mm sizes and include a tool roll for organized shop use and travel.
$263.00
This dishing gauge is fully machined from big billets of aluminum to a final shape and accuracy that's as nice to use as it is to look at. Compatible with wheels from 20-29 inches and all hub combinations. Standoff feet are included for checking dish with the tire in place, even the big fat ones. The gauge uses a unique spring-loaded mechanism to drop the plunger. Press that little brass button on the front and the plunger will drop to the face of the hub. No archaic time-sucking threaded indicators here!
$262.95
Park Tool's Crown Race Cutter Adaptor is used in conjunction with the CRC-1 Crown Race Cutting Tool (sold separately) to machine 39.8mm crown race seats (1.5” standard) on tapered forks with 1-1/8” steerer tubes. It includes a precision-machined adaptor body and a 39.8mm high-speed steel crown race cutter. The CRC-15 will work on forks with a maximum 1.5-inch taper of 4.25 inches.
$188.21 - $239.25
Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size
$230.77
- Hub bearing press set with 10 guides - For ID 8-20mm
$229.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
$229.00
Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm
$220.59
Joker Combination Wrench Set
$219.99
1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex
$214.00
Campagnolo UT-CN400 Chain Tool. - Used to install 12-speed and 13-speed Campagnolo chains
$211.00
Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2
$209.00
- Installation and removal tool for press fit BB86 and BB92 bottom brackets
$204.95
Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.
$204.33
- Set includes 8-19mm wrenches - 12 point dual pawl ratchet for better contact - Ratchet lever on wrench is easily accessible for direction changes - Supertorque corners on open end provides extra turning power - High polished chrome finish is durable and cleans easily - Includes plastic storage tray
$126.40 - $202.18
Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.
$199.99
The Starter Tool Kit 1.1 is designed for the aspiring mechanic looking to get started with the right tools and room to grow. The kit starts with our Burrito Tool Wrap. This versatile wrap keeps your tools organized and protected in a durable, ultra-portable design with twenty pockets, waterproof exterior, and space for tools up to 13.75 inches (350mm) in length. Next we fill the Burrito with the essential tools needed by every mechanic. Finally, we round things out by leaving nine extra spots to add tools as you learn new skills and tackle new challenges. Includes: - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes. - 8mm L Hex - Tire Lever Pair - Yellow - Cassette Lockring Socket - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Pro Travel Pedal Wrench w/ 24mm Socket Driver - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Pro Chain Whip with Integrated Fixed Gear Lockring Wrench - Toothbrush
$199.95
A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. The SK-4 includes: - AWS-10 Fold-Up Hex Wrench Set - BBB-4 Big Blue Book of Bicycle Repair - CC-3.2 Chain Checker - CN-10 Professional Cable and Housing Cutter - CT-5 Mini ChainBrute Chain Tool - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HR-8 8mm Hex Wrench - MLP-1.2 Master Link Pliers - SD-2 Shop Screwdriver: #2 Phillips - SW-7.2 Triple Spoke Wrench - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench
$199.95
- A torque wrench with adjustable range from 4-20Nm - Reversible ratcheting head - Bits are knurled to make insertion and removal easier - Includes the following hex bits 3 4 5 6 8 10 and T20 T25 and T30 Torx bits - Pro model also available which incl
$197.00
- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents
$194.12
A part time universal gear integrated in the handle of the screwdriver significantly increases the working speed. The turbo function can either be switched on or off by pressing a button. Turning it off is recommended for fine adjustment and final tightening or loosening of a high torque screw. The robust steel design is maintenance-free and ensures a long product life. Thanks to the Rapidaptor bit holder, the Kraftform Turbo can be used with all conventional 1/4" hexagon bits for a wide variety of screw profiles. With the Rapidaptor function the bits can be inserted directly and can be easily removed by pushing the sleeve forward—allowing single-hand operation. - Quadruples the screwdriving speed in a purely mechanical way (without battery) - Activation and deactivation of the turbo function by a simple push of a button - The fixable universal gear allows powerful screwdriving and easy fine adjustments - Robust, maintenance-free gear made of steel (maximum torque 14 Nm) - 1/4" hexagon take-up with Rapidaptor quick-release chuck
$189.95
Upgrades the DT-5 to the DT-5.2. - Four telescoping axle adaptors - Two stand off studs for Flat Mount alignment - 12mm front fork thru axle sleeve