Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Vittoria Pit Stop Tire Sealant
$11.99 - $17.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Topeak Airbooster G2 CO2 Inflator
$44.95
The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately
Topeak Pocket Shock DXG
$49.95
The Topeak PocketShock DXG just got better with a higher pressure rating. This precision fork and shock pump features an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar! The flexible hose takes stress off the valve stem when pumping, protecting your expensive fork and shock fittings. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates the common problem of air loss when disconnecting.
Topeak Pressure-Rite
$13.95
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
Topeak RaceRocket MT
$39.95
Topeak's RaceRocket MT boasts aluminum construction for superb function, durability, and max pumping power. Its small size easily fits into a jersey pocket and with a capacity of 90 psi and a large-diameter barrel you'll have no problem getting rolling again. The RaceRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.
Topeak Road Morph G
$42.95
Topeak's Road Morph G is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Road Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose with built-in gauge and a T-handle. Of course, it fits Presta and Schrader valves and a frame mount is included, too.
Topeak SmartGauge D2
$34.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Topeak SmartHead Upgrade Kit
$27.95
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
Topeak Tri-BackUp Elite
$49.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Tri-BackUp Elite is specifically designed for saddles with angled rear rails. - Material: CNC aluminum - Hydration Capacity: One or two bottles (up to 750cc each) - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Max Load: 2.5 kg / 5.5 lb - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4 cm / 3.4” x 3” x 2.9” - Weight: 102 g / 3.60 oz (Total) 88 g / 3.10 oz (w/o Inflator Bracket)
Topeak Tri-BackUp Elite 90
$59.95
Being elite means making no compromises when pursuing perfection...everything matters. Mounting your gear in a position to minimize drag is just one tip for performance. The Elite 90 is designed especially for triathlon specific saddles with vertical rear rails. - Material: CNC aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5kg / 5.5lb - Compatibility: Ninja TC Road, Ninja Pouch+ Road Ninja CO2+ Tri-Cage series - Added Features: 1 Micro AirBooster and 2 16g CO2 cartridges included - Angle adjustable - Size: 8.6 x 7.6 x 7.4cm / 3.4" x 3" x 2.9" - Weight: 102g / 3.60oz (Total), 88g / 3.10oz (w/o inflator bracket)
Topeak Valve Tool
$8.95
A metal valve tool designed to tighten or remove Schrader and two-piece Presta valve cores. A special tool feature can also tighten or loosen Presta valve extensions. - Material: Aluminum - Schrader or two-piece Presta valve cores - Weight: 7 grams - Size: 4.5 x 1.1 cm / 1.8“ x 0.4”
Sunlite Ball Inflating Needle
$1.99
- Ball-inflating needle for footballs, basketballs and more
Silca EOLO III Co2 Regulator w/ two Premium 16g Co2 Cartridges
$30.00
In 1982 SILCA developed the first regulated CO2 inflator. As Claudio himself explained, 'Before EOLO, you had to turn the cartridge and pray!' Giving the user the ability to regulate the flow of gas into the tire was the key to widespread adoption of compressed gas for roadside use. EOLO III builds on the SILCA tradition by using an ultra-precise spool valve design with light action spring to give the user perfect control of the flow into the tire. The full metal construction of the EOLO III contains no plastic parts and is manufactured entirely from 6063 series aluminum and stainless steel. Hardened tool steel puncture pin is more than 2X the hardness of traditional puncture pins to ensure smooth operation in all conditions over many years. SPECIFICATIONS: -Package contains EOLO III Regulator with Red-White-Green Insulators -2 Ultra-Premium 16gm CO2 Cartridges -1 SILCA Cartridge Helmet -Lightest spring action of any spring-valve regulator -'Camera-lens' style valve head allows for easy installation even in disc wheels
Silca Pista Floor Pump
$99.00
Since 1917, SILCA has been the global leader in high-performance pumps for cycling. And if we had to choose one pump to which we owe that reputation to it would be this one, the Pista Floor Pump. If you’ve been around the sport of cycling for any length of time, you’ve likely seen this pump with a Molteni orange barrel. That’s because, during the 50’s, 60’s and 70’s the orange Pista was the pump that shop mechanics used because of its rebuildability; the pump that the European pro mechanics preferred because of its flat profile; and the pump that cyclists around the world bought knowing that it would be the last floor pump they ever needed to buy. In 2017, we took all of the qualities of the original Pista and introduced a re-engineered, limited-edition version of the pump with the iconic Molteni orange barrel to celebrate 100 years in business. These modern orange pumps were initially meant to be a limited-release product to celebrate our heritage, but the positive response and demand for the product has continued. As we’re now in our second century of making of high-performance pumps, we’re pleased to make Pista part of our permanent floor pump line-up and will offer it in a modern red livery moving forward. The modern Pista preserves the beautiful aesthetics of the original but improves on the design in some very important ways. The gauge has been updated to a much higher precision; the handle is a reincarnation of the original but is now made with Ash wood instead of Bakelite, and the steel barrel and piston shaft are upgrades in quality and durability from the original.
Silca Pista Plus Floor Pump
$145.00
This new generation Pista comes with all of the performance features and components that have made it our top-selling floor pump since it was launched in 1962, Plus a few design features borrowed directly from the SuperPista Ultimate for increased stability and versatility. Pista Plus, as with its predecessors, is a pump that’s built to outlast the rest of your cycling equipment. The durable steel barrel, 3mm-thick leather plunger piston design, and our proprietary brass air bridge and check-valve assembly ensure unrivaled longevity, not just in material strength but rebuild-ability as well. The smaller-diameter barrel combined with the superior pumping efficiency of our classic 28mm 731 model Italian leather plunger washer and German Igus linear bearings also mean that Pista Plus is capable of reaching pressures of up to 220 PSI, another nod to the Pista lineage. The ‘Plus’ in Pista Plus stands for ‘Plus stability.’ Whereas previous generations of Pista pumps had design features that made them ideal for taking with you, we designed Pista Plus for those who prefer to leave the pump at home, in the shop, at the velodrome, etc. A first for the Pista product line, Pista Plus features a three-footed aluminum base and an enlarged lathe-turned Ash handle, which both draw inspiration from the ergonomics and superior stability of the SuperPista Ultimate platform. Pista Plus has a long, flexible filler hose with an integrated Schrader chuck and comes standard with our push-on alloy Presta chuck with a bleeder valve. The chuck dock on Pista Plus is an intelligent design enhancement over the previous chuck dock design in that it now secures the chuck at the Schrader chuck instead of at the end of the Presta chuck. This design enhancement means that the rider can choose to swap the standard chuck out for our HIRO chuck, Disc Wheel Adapter while retaining the ability to secure the hose to the pump. The large 64mm gauge is accurate to 2% and combined with high contrast face design, provides improved readability.
Silca SuperPista Digital Floor Pump
$275.00
This third generation Silca SuperPista combines all of the handcrafted elements which have made SuperPista the go-to pump of the ProTour for more than 30 years, with the two most mechanic and consumer requested features: a high accuracy digital gauge, and gauge readout located at the top of the barrel for easier reading. With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest efficiency, smoothest running SuperPista to date. Efficient, accurate, durable are the trademarks or the SUPERPISTA DIGITAL floor pump. SPECIFICATIONS: -High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm and adjustable pressure units (uses two CR2032 batteries) -Full-size Ash wood handle with secure carrier strap -High-efficiency 28mm SILCA leather piston assembly -Brass air check-valve assembly -Alloy barrel with plated steel piston shaft -Long filler hose with integrated Schrader chuck Hiro locking-lever Presta chuck with magnetic dock -Rated to 220psi
Serfas 16-Gram CO2 Threaded Cartridges
$12.00
These compact, threaded 16-gram cartridges work with compatible CO2 inflators and easily packs into your seat bag.
Serfas FP-T3 AIR FORCE TIER THREE Floor Pump
$45.00
Air Force Tier Three floor pump - Premium Rubber Overmolded Ergonomic Handle - Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR) - Larger More Stable Pump Base - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - All Metal Barrel and Pump Base - 28 1/2" Pump Height
Serfas Mini Floor Pump w/Gauge
$45.00
Serfas’ Mini Floor Pump can inflate a tire up to 120 PSI in no time. The Quick Draw head, gauge, and integrated foot peg make pumping up your tire almost effortless. Plus, this lightweight pumps folds up for easy storage when it's not being used. • Folding design for easy storage and carrying • Built-in gauge • High pressure capacity (120psi) • Integrated foot peg for easy control • Quick draw head for Schrader and Presta valves • Weight: 179 grams
Serfas Pump O-Ring
$3.00
Replacement O-ring for Serfas floor pumps
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
SKS Pump Adapter with Chain
$7.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Quarq TyreWiz
$199.00
TyreWiz is the first-of-its-kind tire pressure sensor for riders of mountain bikes and road bikes. Lightweight, durable, and powered by a long-lasting user-replaceable coin cell battery, TyreWiz monitors air pressure in real-time and relays the data to a cycling computer or a smartphone. The TyreWiz app uses that data to deliver personalized recommendations and pressure alerts. For the first time, riders have access to highly accurate real-time tire pressure data to make decisions that can affect rolling resistance, traction, tire wear, and rider comfort. - TyreWiz is the first real-time tire pressure sensor for bicycle riders - Designed for all bike riders, regardless of their experience or bike’s intended use - Works with any tire that uses a removable Presta-style valve core: both tube and tubeless, and tires with anti-flat sealant - Data can be read on a cycling computer or smartphone with the app for iOS and Android - Smartphone app displays personalized recommendations, current tire pressure, and low/high-pressure alerts - Retail package includes two sensors, batteries, and a valve core removal tool - Use it for every ride to find the perfect combination of tire, wheel, and pressure in changing terrain and conditions - Include LED lights to indicate when pressure is outside the target range - Designed for road and mountain bike riders - Personalized tire recommendations in the smartphone app for iOS and Android - NFC pairing for fast and easy connection by BLE to a phone - Data reported with +/- 2% accuracy at .1 PSI resolution - Broadly compatible with tires that use a removable Presta-style valve core - Inexpensive, user-replaceable CR1632 battery lasts for 300 hours - IPX7 dustproof/waterproof rating - Box includes valve core removal tool for installation
Problem Solvers Replacement Pump Head O-Ring
$3.50
If you own an Air-Bob inflator, you probably use it A LOT. If you need to replace the original pump head o-ring, no problem, here's the replacement part to get you back up and running.
Pro Pressure Checker Digital
$25.99
The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves
Portland Design Works Shiny Object CO2 Inflator
$19.00
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 
Park Tool Emergency Tire Boot
$3.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Park Tool Vulcanizing Patch Kit
$2.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
MSW CO2-38 Cartridges
$14.99
- MSW threaded CO2 Cartridges fit all MSW inflator heads as well as non-MSW inflators - 38-gram threaded cartridges are sold individually
MSW INF-100 Windstream Inflator Head
$14.99
MSW Windstream Inflator Head is a push on inflation system. Compatible with all 3/8" threaded compressed gas cartridges. Works with Presta and Schrader. - Compact design for easy storage - Alloy construction for durability and lightweight - Press on for both Schrader and Presta valves - Compatible with all 3/8" threaded compressed air cartridges
Lezyne ABS-1 Pro HP Chuck
$17.99
Upgraded and redesigned for Year 11, Lezyne's ABS1 Pro further advances our classic Flip-Thread Chuck system. It features a 90° design for enhanced function and usability. The highly durable construction is built using machined aluminum and composite matrix materials, with an extremely robust and fluid brass swivel. The chuck quickly “flips” for Presta or Schrader valves and threads on for superior engagement. An integrated Presta valve-core wrench completes the system, providing easy valve core tightening or removal for tubeless systems.
Lezyne Gauge Drive HV
$49.99
Lezyne's Gauge Drive HV is a compact high volume hand pump made of custom CNC machined aluminum for precise, lightweight construction. The high-volume design easily inflates mountain bike tires to the desired volume with fewer strokes. The overlapping handle and barrel, with oversized piston and shaft, are integrated into a compact design. It comes equipped with Lezyne's ABS Pen Gauge, a compact in-line pressure gauge compatible with Presta and Schrader valves.
Lezyne Micro Floor Drive HVG
$64.99
Floor pump efficiency in a super compact, hand pump size. Lightweight CNC machined aluminum barrel, piston, base, and T-handle optimized for high volume applications. Long, versatile hose improves pumping convenience. Stainless steel foot peg stabilizes pump during use. HVG version features integrated pressure gauge. ABS Flip-Thread Chuck equipped. Presta and Schrader compatible. Includes composite matrix frame mount. - Max: 90psi | 6.2bar - Size: 300mm | 225g
Lezyne Micro Floor Drive XL Pump
$59.99
The Micro Floor Drive XL is a portable hand pump with floor pump capabilities developed to efficiently inflate fat bike tires. It features a CNC-machined aluminum construction, which keeps its weight to a minimum without sacrificing durability. An extra-large, high-volume barrel produces large amounts of air with each pump and can inflate tires up to 35 psi (2.4 bar). A long, integrated hose and a stainless steel foot peg improves pumping efficiency and reduces trailside downtime. The ABS Flip Chuck is compatible with both Presta and Schrader valves and threads into the pump’s base for optimal storage.
Genuine Innovations 16 Gram Threaded CO2 Cartridges (20-pack)
$3.50
16 grams of Genuine Innovations' most popular size CO2 cartridge. Perfect for road tires and standard bike tires. These threaded CO2 cartridges are compatible with all Genuine Innovations inflators. - 20-pack
Genuine Innovations Side of Bacon
$7.99
Lightweight plugs for tubeless tire punctures. When paired with Genuine Innovations' Tubeless Tackle Kit (#G20439) or Tubeless Repair Kit (#G2650), you can plug pesky punctures in seconds and cycle confident for many rides to come.
Genuine Innovations Tubeless Tire Repair Kit
$7.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.
XLAB Multi-Strike Repair Holder
$27.95
XLAB's versatile Multi-Strike Repair Holder provides fast access to your repair kit, whether you have tubular or clincher tires. Carry CO2s and an inflator on one side and a spare tube/tire or pump on the other! - VERSATILE MOUNTING - Will mount on DELTA single bottle systems or at the rear of the XLAB CARBON WING and SUPER WING (each sold separately) - STORAGE SAVER - Mounts to your hydration carrier (sold separately), saving space in your storage bag for your cell phone, nutrition and other important items - FAST ACCESS - Simply unscrew, and attach your inflator and CO2 cartridges. Simply unstrap your spare tire, tube or inflating foam sealant. - The CO2 Holder holds 2 CO2 Cartridges (included), and a NANOFLATOR or SPEED CHUCK inflator (each sold separately) - The Multi Holder can hold a tube, inflating foam sealant, TIRE MATE or tubular tire (each sold separately - must purchase optional XCW STRAP if storing a tubular tire) - Glass Reinforced Nylon - Chassis weight: 30 grams Includes: - Center Plate - Multi Holder - CO2 Holder - 2 AIR STRIKE CO2 Cartridges - Hardware Popular Clincher Setups (accessory items sold separately) - Tube & tire levers on Multi Holder. Two CO2 and a NANOFLATOR inflator on CO2 Holder. - 4 CO2 cartridges and NANOFLATOR inflator. (Purchase an extra CO2 Holder) Popular Tubular Setups (accessory items sold separately) - Tubular tire on Multi Holder. Two CO2 & NANOFLATOR inflator on CO2 Holder. - Tubular tire and inflating foam sealant. (Purchase an extra Multi Holder)
XLAB Starter Kit
$93.95
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak Bracket (Centerline Mount)
$4.95
Mounting Kit for Mountain Morph and Turbo Morph G.
Topeak Floor Pump Parts Kit
$4.95
Replacement parts for JoeBlow Pro and JoeBlow Booster.
Topeak JoeBlow Ace DX
$149.95
The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles. - SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 260 psi / 18 bar; 4” base mount analog - Base: Aluminum/Rubber - Barrel: Anodized aluminum - Handle: Oversize dual tone - Weight: 2.45 kg / 5.4 lb - Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”
Topeak JoeBlow Max HP Floor Pump
$39.95
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.
Topeak JoeBlow Pro X
$109.95
The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.
Topeak JoeBlow Sport III
$49.95
The Topeak JoeBlow III continues the tradition of setting the benchmark for floor pump durability and performance while ushering in upgrades with an enlarged 3-inch chronograph-inspired gauge and hammer-style TwinHead DX pump head. A durable steel barrel and base as well as an ergonomic padded handle make inflating tires a breeze. - Presta / Schrader / Dunlop-compatible - Max 160psi / 11bar - Volume per stroke: 317.5cc - 3.7lbs / 1.68kg - Ball and bladder needles included
Topeak JoeBlow Twin Turbo
$199.95
Topeak’s TwinTurbo technology is a new concept for floor pumps that will save up to 50% of your time and effort. For over 25 years, Topeak engineers have had one dream in mind. Create the ultimate floor pump. It must have high pressure air output and massive volume delivery to fill both road and MTB tires easily and efficiently. TwinTurbo technology utilizes the pull and push of every stroke by transferring air between its two barrels. Pulling the handle up moves a massive amount of air volume from the larger barrel into the smaller barrel. Pushing the handle down compresses the air in the smaller barrel into high pressure output that fills road tires with high pressure, or MTB tires with large volume. No matter the type of tire, the JoeBlow Twin Turbo will literally blow you away. - Head: SmartHead DX1 full metal pump head w/ air release button & x-long hose - Gauge: 200 psi / 14 bar - 3” Top mount analog - Base: Aluminum / Rubber pad - Barrel: Anodized aluminum - Handle: Oversize padded - Added Features: Dunlop valve adapter Ball / Bladder heads Hose dock - Size: 72 x 28 x 21 cm / 28.3” x 11” x 8.3” - Weight: 3 kg / 6.61 lb
Topeak Joeblow Elite
$79.95
This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.
Topeak Joeblow Pro Digital
$124.95
An easy-to-read top-mounted digital gauge with rubber bumper impact protection delivers accurate tire pressure readings up to 200psi / 14bar. The large padded handle provides comfort while the wide steel base keeps everything stable. The extra-long hose can even reach bikes mounted in a work stand. The SmartHead DX3 automatically adjusts to fit Presta or Schrader valves and a new lower-profile air-release button allows fine tuning of tire pressure while preventing unintended pressure release. - Head: SmartHead DX3 w/ air release button & extra-long hose - Barrel: Painted steel - Gauge: 200 psi / 14 bar, Top mounted digital (Tolerance : < 100 psi ± 1 psi / > 100 psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 337cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushioned rubber for digital gauge protection, auto off, Dunlop valve adapter, Presta valve adapter, Ball / bladder heads, Hose dock - Size: 73.5 x 25.5 x 16.4cm / 28.9" x 10" x 6.5" - Weight: 1.97kg / 4.34lb
Topeak Joeblow Sport 2Stage
$99.95
The JoeBlow Sport with unique 2-stage design delivers both high pressure and high volume in record time. Stage one opens both barrels for huge volume, reaching 30 psi with 30% less effort than standard floor pumps. Stage two utilizes the small barrel for pressures up to 160 psi. Hammer type TwinHead DX5 pump head with an extra-long and tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base provide extra stability. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel / anodized aluminum - Gauge: 160 psi / 11 bar, 3" mid mount analog Stage 1 : 0 - 30 psi Stage 2 : 30 - 160 psi - Volume Per Stroke: 715cc (Stage 1), 258cc (Stage 2) - Handle: Oversize / Dual density polymer - Base: Hardened steel - Ball / bladder heads, Hose dock - Size: 74 x 26.6 x 18cm / 29.1" x 10.5" x 4.6" - Weight: 2.5kg / 5.51lb
Topeak Joeblow Sport Digital
$89.95
An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast. - Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose - Barrel: Painted steel - Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%) - Unit: psi, bar, kg / cm² - Battery: CR2032 x 1 (included) - Volume Per Stroke: 318cc - Handle: Oversize padded / Dual density polymer - Base: Hardened steel - Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock - Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6" - Weight: 1.8kg / 3.97lb
Topeak Micro Rocket AL
$29.95
Topeak's Micro Rocket AL is a small pump that packs a punch. Small in stature, this 6.3-inch pump is a giant in tire inflation. It utilizes a compact, single-action design to blast tires up to 160 psi.
Topeak Mini Dual
$18.95
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.
Topeak Mini Dual DX
$24.95
Topeak's Mini Dual DX is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, their thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves.
Topeak Mini Dual DXG
$29.95
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
Topeak Mini Dual G
$22.95
Topeak's Mini Dual G is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock head ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.
Topeak Mini Morph
$34.95
Topeak's Mini Morph is the perfect answer for riders who've had trouble deciding if they want a frame or floor pump. The Mini Morph is both! For maximum pumping power, it features a high-volume aluminum barrel, a fold-out base, a long hose and a T handle. A frame mount is included, too.
Topeak Mini Morph G
$39.95
The smallest Morph is still big on features. Fills both fat and skinny tires with ease, fold out foot pad for hassle-free inflation. Includes in-line gauge for perfect inflation every time.
Page 1 of 6 Next page