Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

$9.99
- Clamp-set for seatstay mounting for 24mm - For mounting a rear carrier on seatstays without eyelets
$11.00
3-part Elastic Fixing Strap
$34.99
QR Axle Adapter with a set of adapter plates and mounting parts for assembling a rear carrier to frames without eyelets.
$21.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars
$18.95
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
$14.99
For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.
$9.99
- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag
$6.00
For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts
$8.00
- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L
$13.95
These handy adapters are for mounting a rack on bikes where clearance is needed for disc brake calipers or other accessories. - Screw them into the same holes on the dropouts for rack or fender bolts - Made from special hardened aluminum stock with a threaded steel insert - Best when only torqued to the same degree as rack bolts - Pegs are about .75" long - Can be used single sided or double sided - Sold in Pairs
$13.95
Jandd Rack Extenders are used for mounting rear racks to braze-on points or the mono-stay adapter. - Sold in Pairs
The Delta Stwap allows you to ditch the pack and carry everything you need for a quick tire repair all in one convenient, easy to access location. Silicone strap safely stores CO2, tubes up to 29 inches, tools and more. - Easily adjust to fit most frames, can be installed on the top tube, downtube or seat tube - Securely holds items in all terrain - Silicone materials will not damage bicycle frames - Ergonomic pull tab for easy installation and removal
$10.99
Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum
$28.00
- Replacement clip-on wheel for Bike Travel Bag Pro
$25.00
Cargo Straps
$40.00
The EVOC FRAME PAD protects the bike frame from scratches and other transport damage. - Fits most bike frames - Attachment for handlebar - Velcro straps attachment
$45.00
Phone Pouch
$25.00
Raincover Sleeve Commute
$40.00
Tool Wrap WP
$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
$9.95
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included
$39.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$7.99
A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.
$6.00
Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB
$12.00 - $15.00
Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes
Page 1 of 4 Next page