Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Other

$65.00
For riders looking for comprehensive coverage to protect high risk areas of a Hardtail MTB frame. Bike protection provides great benefits starting from the aesthetics side, right over to the functionality/durability of the bike. Bike protection kits are high-quality polyurethane films that are applied to the bike to protect it from scratches, rock chips, and/or scuffs caused by trail debris, rocks, cable rash, heel rub, chain slap and other elements while out on the trails. All RideWrap protection accessories have been designed to give riders leading coverage for their dollar. All RideWrap protection kits are made with high-quality, bike-tested RideWrap materials that feature durability, stain resistance, self-healing properties, and a 10 year warranty. - Matte clear film - Fits all makes, models and sizes - Designed for maximum coverage with minimal trimming - Designed around hardtail mountain bike geometry - The Hardtail MTB Kit includes protection for toptube, full downtube, 4 stays, seat tube, and extra pieces to provide approximately 60% frame coverage - Made in Canada with high-quality RideWrap materials - Kit is packaged with instructions, pre-install cleaning wipe, install solution concentrate, squeegee, microfiber cloth, and RideWrap sticker sheet
$20.99
Front and Rear SKS V-Brace Fender Stay Set with Drawbolts
$39.99
- Easy to apply: Simply peel off and install - Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays - Durable, weatherproof 3M adhesive - 20-piece pack is designed to fit chain stays and rear stays on most bikes
$3.99
The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA
$39.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive. - 2 large and 2 medium patches - 3 small frame protectors - 2 large frame protectors
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm. - Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside - Removable Velcro cuff provides increased insulation from cold - Vent zipper can be opened if hands start to overheat - Can be easily installed and removed for temperature changes - Reflective material on seam and logo - The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long - Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$2.29
Rep your ride with some sweet new Pure Cycles stickers! These sticker packs come with a random assortment of sticker designs and include roughly 4 stickers per pack. Think of it like a grab bag full of stickery awesomeness. Who knows what you'll find! Well you'll probably find stickers but you get the idea: Pure Cycles + Stickers = Awesome BOOM!
$16.99
Nylon beaded cable ties - 8-inch - Reusable
$48.00
Taste the rainbow, kids! Frame protection is opaque so frame will not be visible under Frame Keeper. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$12.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - For bikes without factory mounting plate (includes top plate and bolt) - 285mm (for bikes 22" and under) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands
$21.95
Aluminum Direct Mount kickstands in KSA 40mm. These kickstands only work with bike frames designed for these kickstand standards. KSA 40 has two bolt holes 40mm apart. This particular KSA 40 design mounts inboard of the chainstay, not outboard.
$4.00 - $7.00
You can proudly display these Surly Logo Stickers just about anywhere they'll fit. They comes in three sizes to meet a wide range of sticking needs.
$40.00
The Surly Deck Pad is the ultimate in cargo bike derrière accessories. Sold individually, the Surly Deck Pads are designed to easily attach to the rear decks of our Big Easy, Big Dummy and Big Fat Dummy for a luxurious passenger riding experience. Simply put, they make riding on the back of our cargo bikes even nicer. Two Pads will cover the whole deck, so there, now you know. You could probably even convince your ride-along friends or children to chip in and help pay for them. After all, nobody rides for free. - The Deck Pad mounts to the Dummy Deck to provide a soft platform for passengers large and small - Sold each - Also available as part of the Corral Kit - Individual Deck Pads measure approximately: 13”x8”x2”
$15.00
These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand. - Allows use of any kickstand while protecting chainstays from damage - Includes two plates to protect the top and bottom of the chainstays - Compatible with 2020 and newer Disc Trucker frames
$8.00
Surly's Junk Straps can secure almost anything to almost anything else. Essentially an extra long toe strap, they're easy to use and store. And, trust us, these handy straps will get used often.
$20.00
Further personalize your unique Surly bike with one of four Surly Make It Your Own Decal Sets, featuring alternative fonts and designs for the discerning rider. Stickers may also be affixed to helmets, mini fridges, dog food bowls, and more. - Decals are available in black or white - Each set includes decals for the down tube, chainstays, and fork blades, a Surly Make It -your Own seat tube icon, Surly headbadge, and a ’Natch frame sticker - Dry-transfer style
$20.00
Further personalize your unique Surly bike with one of four Surly Make It Your Own Decal Sets, featuring alternative fonts and designs for the discerning rider. Stickers may also be affixed to helmets, mini fridges, dog food bowls, and more. - Decals are available in black or white - Each set includes decals for the down tube, chainstays, and fork blades, a Surly Make It -your Own seat tube icon, Surly headbadge, and a ’Natch frame sticker - Dry-transfer style
$48.00
Our Cheetah print is guaranteed to make you 20% faster and 100% feistier. The kit is clear so your frame will be visible. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$48.00
Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup. - Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size. - 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub. - Easy to apply. No water necessary. - Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife. - An affordable way to customize your bike.
$20.00
Show Salsa pride and add some flare with these stickers. - Slap a sticker on your helmet, bike, or whatever you choose
$15.99
Converts quill style forks to use threadless stems.
$35.00
Frame Protection Protect your bike against body snatchers, the blob, and those troublesome triffids. Specifically designed to protect your bike's exposed areas against knocks and wear, commonly picked up on the trails and in transit, the seventeen patches can be used independently or in harmony, letting you decide what areas to protect.
$10.99 - $15.00
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
$8.99 - $12.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
$2.29
Rep your ride with some sweet new Pure Cycles stickers! These sticker packs come with a random assortment of sticker designs and include roughly 4 stickers per pack. Think of it like a grab bag full of stickery awesomeness. Who knows what you'll find! Well you'll probably find stickers but you get the idea: Pure Cycles + Stickers = Awesome BOOM!
$13.99
8 sets of SKS Breakaway Mount Eyebolt and Nut Set
$15.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way. - Holds one standard bottle cage - Accommodates two threaded CO2 cartridges, up to 25g - Can be installed directly to bottle cage mounts on frame - Bottle cage and cartridges sold separately
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow. - Waterproof, 5mm neoprene construction with nylon lamination inside and outside - Attaches to handlebars - can be easily installed and removed for temperature changes - Can be used with regular cycling gloves of varying thickness - Reflective material on seam and logo - Stays open, allowing easy access and removal of hands