The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
High-performance simplicity. New carbon design leverages the groundbreaking, award-winning design of the Torpedo Kompact 100 for an even lighter weight, sleeker and more rough-road durable hydration system. - NEW unidirectional high-modulus carbon mounting plate - Includes NEW high-grip carbon Raptor Cage, color-customizable to suit your setup - Just add your choice of beverage: Includes hyper-reflective Cool Shot bottle to keep liquids super cool - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip brackets simply clip on and Velcro down to aerobars - On top Garmin computer mount gives quick-glance bird's-eye-view of your cycling data All Inclusive System - Comes with everything you need – mounting plate, Garmin-specific computer mount, cage and bottle No-Fuss Installation - Torpedo Kompact 500 comes fully assembled - No Zip-ties, rubberbands or need to concoct your own mounting solution required – simply click-on and Velcro-down - XLAB SecureClip brackets eliminate rattling and shifting. Fits 22.2mm diameter aerobar extensions. \ - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics) Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Kit-Match with a Color Customizable Cage: - Color match your bike kit! Insulated Bottle - Hyper-reflective Cool Shot insulated bottle keeps liquids super cool Highest Bottle Grip of Kompact Series - 6 lb grip force is durable for rough road conditions: Carbon anti-launch design increases grip force - Capacity: Includes 20oz (600ml) XLAB COOL SHOT insulated bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 154.4g (without bottle or computer) - Length: 145mm - Bottle Grip Force: 7lbs Construction - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Carbon - Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends - Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
The Syncros Coupe Cage 2.0 is our top-entry bottle cage. Designed using a unique composite it is incredibly light and optimized to fit Syncros water bottles securely.
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
• Fits bars: 22.2 to 31.8mm diameter • No-Tool quick-release mount • Anodized finish
The SICURO Carbon Bottle Cage is produced using a highly optimized carbon lay-up that delivers exceptional bottle access and retention along with unique slotted mounting eyelets which allow fore/aft adjustability on the bike
Each SICURO Ti cage is hand-made in the USA at the Silca HQ in Indianapolis, IN headquarters using custom manufacturing processes and a state of the art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets which allow fore/aft adjustability on the bike. -Seamless 3-2.5 titanium tubing -Extended adjustment mounting - up to 16mm fore/aft -Low-profile 6-4 titanium mounting screws (1.5 grams each) -Weight - 29 grams w/o screws -SILCA Shield Warranty included covering your cage for 25 years!
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
Somewhere between the excitement of competition and recovery, it can be easy to misplace things. With Profile's Aerodrink Parts Kit you can replace both straws, the mesh sponge and the two rubber bands that keep your Aerodrink ready for your next event.
This aluminum cage provides rigid clamping to keep bottles secure. - Fits 74mm bottles - Bolts included
The Pro Side Cage is an aluminum side-pull bottle cage designed for easy access to bottles with small frames and full suspension bikes while maintaining secure clamping. - Fits 74mm bottles - Bolts included - Weight: 46g
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Planet Bike's PB Cage holds your bottle securely with sturdy 6.2mm-diameter 6061-aluminum tubing and comes in a variety of colors so you can coordinate your bike down to the last detail.
Planet Bike's Sideload Cage is perfect for smaller frames and compact geometry. This cold-forged aluminum cage loads from the right on downtubes and the left on seat tubes. And, it's only 41 grams!
- Constructed using a 6mm aluminum rod - Embossed MSW logo
Lezyne's Flow Cage is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. Its X-Grip design holds bottles securely over the rough stuff and allows for easy in/out.
Lezyne's Flow Cage SL is made from a fiber reinforced Composite Matrix material for low weight, strength, and reliability. And, it loads from the side for added convenience — especially on compact frames or full suspension bikes! It is available in both left-side and right-side loading configurations.
The Cannibal XC is a side entry fiberglass reinforced water bottle cage for situations where standard cages are difficult to use. -Works well with small and sloping frames
$19.99 - $24.99
- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material
The new design of the Custom Race Plus bottle cage streamlines the bottle for easier handling and improves bottle cage insertion/removal. - Painted with Fiber-reinforced (FRP) construction - Adjustable elastomer rubber shim - The choice of the world’s best Pro Teams
Custom Race Plus is an evolution of the most popular bottle cage in the world. It is permeated by a distinct and unmistakable racing feel. Tested and developed "on the road" with the most important Pro Teams worldwide Custom Race Plus satisfies the expectations of all cyclists, at any level. - Top-class hold on the bottle - Self-adjusting retention system - Used by the best teams in the world - Weight: 40g - Diameter: 74mm - Material: FRP
The choice of the best World Tour Pro Teams - Injection-molded bottle cage - Carbon fiber - Extremely light - Grips bottle firmly yet insertion / removal is very easy. - Made in Italy
Vico is the first-choice carbon bottle cage used by the best World Tour teams. Feedback given by champions made it possible to design and manufacture this bottle cage, so it could meet all riders' needs. Many years of races and victories with the world's best professional teams have helped us design, test, and create a bottle cage that will meet the expectations of even the most demanding cyclists. - Injection bottle cage - Carbon fiber - Extremely light - Grips bottle firmly yet insertion/removal is very easy - Weight: 23g - Made in Italy
- Rigid alloy construction - Weighs only 65.2 grams
Page 1 of 6 Next page